User guide

DS7446KP | User Guide | 10.0 PIN Commands
Bosch Security Systems | 12/04 | 4998149924B 25
10.0 PIN Commands
If the keypad sounds the Error tone when you enter a user
number, the user number does not exist in your system. If this
is correct, you must add this user number before using the
following commands to change the user’s PIN, authority level,
or area assignment.
10.1 Change PIN
[# Command][5][5]
Use this command to change your Personal Identification Number (PIN).
The keypad automatically exits this command.
10.2 Change or Add a User PIN
[# Command][5][6]
Use this command to change an existing user PIN, or add a new user PIN
to the system.
You cannot change your own PIN using this command.
Refer to Table 12 for the options available in this command’s menu.
Table 12: [# Command][5][6] Menu Options
Keypad Display What To Do
Push 1 to change
PINs.
Press [1] to modify a user’s PIN. Refer to Step 3 on
page 26 for the procedure.
Push 2 to change
authority level.
Press [2] to modify a user’s authority level. Refer to
Step 2 on page 26 for the procedure.
Push 3 to change
areas assigned.
Press [3] to modify a user’s area assignment. Refer to
Step 1 on page 26 for the procedure.