User guide

DS7446KP | User Guide | 9.0 System Status Commands
22 Bosch Security Systems | 12/04 | 4998149924B
9.3 View System Troubles
[# Command][4][2]
Use this command to view system troubles.
Refer to Table 10 for a list of some system trouble messages.
Table 10: System Trouble Messages
Keypad Display Cause for Message
System running
on battery only.
There is no AC main supply. The system is running
on standby battery only.
Comm Fail
Destination 1
The system failed to communicate with the ARC.
Line 1 trouble.
Check dial tone.
The telephone line is missing, or there is no dial
tone.
Call for service
Call your alarm company for a service visit.
There are no
system troubles.
No system troubles exist.
9.4 View Alarm Memory
[# Command][4][0]
Use this command to view alarms that were silenced and cleared from the
keypad’s display.