User guide
DS7446KP | User Guide | 5.0 Advanced System Arming Commands
16 Bosch Security Systems | 12/04 | 4998149924B
5.6 Turn the System On with No Exit Tone
Refer to Table 8
Turning the system on with no Exit Tone silences the Exit Tone, and
doubles the Exit Delay timer.
For example, if you normally have 30 sec to leave the building after
turning the system on, you now have 60 sec to leave.
Table 8: No Exit Tone Arming Commands
Arming Command Key Sequence
All On with No Exit Tone Press and hold [On], or
press [# Command] and then press and hold [1]
Perimeter Only with No
Exit Tone
Press and hold [Perimeter], or
press [# Command] and then press and hold [2]
Partial On with No Exit
Tone
Press [# Command] and then press and hold [3]
5.7 Extend Auto On Time
[# Command][5][1]
Your alarm company can program your system to automatically turn on.
Use this command to delay the auto-on time by one hour.
This command only works when the system sounds the Auto On Alert
tone, which is the same as the Entry tone.