User guide

DS7446KP | User Guide | 5.0 Advanced System Arming Commands
14 Bosch Security Systems | 12/04 | 4998149924B
5.0 Advanced System Arming Commands
5.1 Turn All Areas On
[# Command][8][0]
Use this command to turn all areas within your system All On.
Your system must be split into more than one area to use this command.
If an area has a faulted zone, the keypad identifies the area and provides
instructions to force-arm the area.
5.2 Select Partial On Zones
[# Command][6][5]
Use this command to select which zones turn on when you turn the
system Partial On.
Table 6: Select Partial On Zones Keypad Displays
Keypad Display What To Do
Zn 3 Part Yes
Side Door
This zone is already selected as a Partial On zone.
Zn 4 Part No
Back Door
This zone is not selected as a Partial On zone.
To select this zone, press [4][*]. “No” changes to
“Yes.”
Repeat as necessary for other zones.
5.3 Turn the System Partial On
[# Command][3]
Use this command to turn on part of your system, leaving the rest of the
system off.
You select which zones turn on for Partial On operation.