Instruction manual

Divar Control Center | Operation Manual | Viewing live images EN | 11
Bosch Security Systems
English
To d el e te a g r o u p :
1. Select the group you want to delete.
2. Right click the group and select Delete.
> All subgroups and views under this group are also deleted.
To copy a group:
1. Select the group you want to copy.
2. Right click the group and select Save as. . .
> Enter a new name for the group.
Making views
A view is a collection of camera to cameo assignments that can be recalled for
instant live viewing. A view is always located under a group. Views should be
groupped logically, for example, all cameras showing the entrances to a
building.
To m a ke v i e w :
1. Click one of the camera view icons to select a
multiscreen view.
2. Assign cameras to the cameos.
> The cameras can be connected to different Divars.
3. Select the group where you want the new view to be stored.
4. Right click a group and select Add View.
5. Enter a name for the new view.
6. To recall a particular cameo display, click on the view name.
Camera views
To switch the display mode:
Click one of camera view icons to change the cameo
display configuration.
> Single, Quad, 3x3, 4x4, 5x5 and 6x6 multi-image display modes are available.
To select the sequence mode:
Click the sequence icon to start sequencing through a list of cameras.
> If a group is selected in the System Management window, the Control Center
sequences through all direct members of that group (but not subgroups).
> If a view or camera is selected in the
System Management window, the
Control Center sequences through all direct members of that item’s parent group.
> If a Divar is selected in the
System Management window, the Control Center
sequences through all cameras on that Divar in single mode.
> If a single Divar or a Divar node is selected in the
System Management
window, the Control Center uses the dwell time set in the Divar being displayed. If
a user-defined group is selected in the
System Management window, the
Control Center uses the dwell time set in the Control Center System Settings.
To freeze the video stream
1. Click the freeze icon .
> All displayed cameos are paused
2. Click the icon again to return to live viewing.
Multiple quad views
Four quad views are available. The current quad view is indicated by a number
in the quad icon . Each quad view can have unique camera-to-cameo
assignments.
1. To manually cycle through the available views, click the quad icon .