Installation manual

Bosch Security Systems
Divar - Easy | Installation Manual | Menu system EN | 5-11
Normal
• Select the profile. The Number of active cameras and the Average
IPS per camera are shown.
• Set the maximum recording rate and quality level for all cameras.
Quality is standard, medium or high.
• IPS rates for PAL range from 0, 1/10 (one image every 10 seconds),
up to 25 IPS.
• IPS rates for NTSC range from 0, 1/10 (one image every 10
seconds), up to 30 IPS.
• Select those cameras that you wish to remove from recording. A
check mark under a camera number indicates that that camera will
not be recording.
Input
• Each input, when activated, can change the normal recording
behavior of the corresponding camera for a maximum of 120
seconds. If the value is set to Follows, then the change is active for
as long as the input is active.
• Select the profile.
• Set the recording rate and quality level for all inputs.
• To free IPS bandwidth, the recording rate of cameras not in alarm
is limited to the IPS number displayed.
Motion
• Each motion input, when activated, can change the normal
recording behavior of the corresponding camera for a maximum of
120 seconds.
• Select the profile. Set the recording rate and quality level for all
cameras.
• To free IPS bandwidth, the recording rate of cameras not in alarm
is limited to the IPS number displayed.