Installation manual

Bosch Security Systems
Divar - Easy | Installation Manual | Menu system EN | 5-7
VIEW SETTINGS >
The View Settings menu allows you to set up the display of the individual
cameras. You can also set the sequence in which the cameras are displayed and
the duration. Use the Configure Monitor submenu to set up the monitor display.
>> CAMERA SETUP
Use the Camera Setup menu to access the submenus for setting the camera
names, for locking cameras and for controlling cameras.
>>> Camera name
• Select a camera by pressing a camera key on the unit. The number
of the camera is the number of the connector at the rear of the unit
to which it is connected.
• Enter a name for the selected camera. The name can be up to 16
characters long.
>>> Camera lock-out
• Locked cameras are not visible during normal use.
• Place a check mark under the number of the camera you wish to
lock or press a camera key on the unit to switch the lock on or off.
• Select the Set Password submenu and fill in a 4-digit password to
restrict access to the camera lock-out menu.
>>> Camera controllable
• A check mark under a camera number indicates that it can be
controlled remotely by the Control Center application.
• Press a camera key on the unit to make a camera controllable or
not.
• By default all cameras are controllable.
>> SEQUENCES
The sequence in which cameras are displayed on monitor A is set in the full
screen list menu.
• Set the length of time each image remains on the screen by filling in the
dwell time value.
• Dwell time can vary from 1 to 60 seconds. The default value is 5 seconds.
>> CONFIGURE MONITOR
• To view camera names, and time and date on a monitor set these items to
On.
• Select the position for the text (top or bottom and fine position +11/-11).
Select text intensity. Select the border intensity of the cameos from four
values.
>>> Multiscreen modes
• Pressing the multiscreen key on the unit cycles through all enabled
multiple view modes.
• Enable only those views you wish to see when you use the
multiscreen key.
• The multiscreen modes that are available depend on the number of
cameras connected and the Divar model.
MAIN MENU
VIEW SETTINGS
CAMERA SETUP >
SEQUENCES >
CONFIGURE MONITOR >