Installation manual

Bosch Security Systems
Divar - Easy | Installation Manual | Operating instructions EN | 3-9
Search mode
Press the search key to open the search menu. Use the search menu to
search for stored video recordings.
>> SEARCH CRITERIA
• Set the Event filter to search for only alarm events, only motion events or
both.
• Set to None so that the search is not restricted by events.
• Specify the cameras to search for. The selected cameras are shown at the
bottom of the menu with a check mark. Press a camera key to change the
selection.Select Forward to search from start time to end time or
Backward to search from end time to start time.
• Fill in a time and date from which to start the search.
• Fill in an end time and date to limit the time span of the search.
•Select Start Search (or press F2) to initiate the search procedure.
• Press the escape key to exit the search mode and return to the
previous mode.
>> SEARCH RESULTS
• The recording fitting the filter and closest to the selected date and time is
shown first.
• Use the up/down arrow keys to move through a long list. The selected
recording is shown.
• Press the select key for a full-screen playback of the selected
recording.
• Press the search key during playback to return to the list.
• Press the escape key to return to the filter menu.
PLAYBACK SEARCH
SEARCH EVENT FILTER ALARM/MOTION
CAMERA ALL
SEARCH DIRECTION FORWARD
START TIME 2002-03-14 13:00
END TIME 2002-03-14 14:00
START SEARCH >
DISK CONTENTS
EARLIEST TIME 2002-03-14 14:00
LATEST TIME 2002-06-19 20:23
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
FILTER
PLAYBACK SEARCH
SEARCH RESULTS
CAMERA 1 MOTION 2002-03-14 15:00:17