Installation manual

Bosch Security Systems
Divar - Easy | Installation Manual | Introduction EN | 1-3
Package contents
Check for the following items:
• Digital Video Recorder (Divar 16, Divar 9 or Divar 6 unit)
• Quick reference guide
• Divar operation manual
• Divar Control Center and Archive Player operation manual
• Installation manual (this manual)
• A 25-pin D-type connector board with screw terminals (used for switching
and alarm connections)
• A 15-pin D-type connector board with screw terminals (used for PTZ
connections)
• Power supply cord
• Network cross-over cable
• Serial RS232 cross-over (null-modem) cable
• Rack mounting kit
• A CD-ROM with the software and the manuals.
Installation environment
Mounting: The Divar is supplied as a desktop unit. If desired, the unit may be
rack mounted using the rack mounting kit supplied with the unit.
Ventilation: Ensure that the location planned for the installation of the unit is
well ventilated. Take note of the locations of the cooling vents in the unit's
enclosure and ensure that they are not obstructed.
Temperature: Observe the unit's ambient temperature specifications when
choosing an installation space. Extremes of heat or cold beyond the specified
operating temperature limits may cause the unit to fail. Do not install the unit on
top of hot equipment.
Power Supply: Ensure that the site's AC power supply is stable and within the
rated voltage of the unit. If the site's AC power is likely to have spikes or power
dips, use power line conditioning or an uninterruptable power supply (UPS).