Divar 700 Series Digital Hybrid Recorder / Digital Network Recorder en Operations manual
Divar 700 Series Operating instructions | en 2 Operating instructions These instructions explain the purpose of the front panel keys. The functions available can be limited by setting passwords. Some functions may also require a software license. An administrator has access to many more functions in the menu. Front panel controls Divar 700 Series Figure 1 Front panel controls Keys The keys on the front panel control all functions. Symbols on the keys show the functions.
en | Operating instructions Divar 700 Series OSD key – press to view date/time and camera information, date/time only, or none Search key – press to open the date/time search menu to look for recorded images PTZ key – enables either pan/tilt or pan/zoom modes Freeze key – in live mode, press to freeze the selected image Menu key – opens the menu system Help key – press to view help Mute key – press to mute audio monitoring Open/Close key – press to open or close the DVD drawer Export key
Divar 700 Series Operating instructions | en 4 Stop key – while in playback mode, press to return to live mode Note: IP camera numbering starts at 9 on an 8-channel hybrid model and at 17 on a 16-channel hybrid model. So on a 16-channel hybrid unit with IP cameras, camera key 1 selects analog camera 1 and, when pressed again, IP camera 17. Indicators The indicators on the front panel display light or flash to alert of various operating conditions.
en | Operating instructions Divar 700 Series Viewing pictures The hybrid version has two monitor outputs, A and B. The way in which these monitors display pictures depends on how the system is configured. When an alarm or motion input is detected, the camera picture with the Alarm/Motion indicator can be displayed on monitor A, B, or both. When multiple alarms or motion occur, camera pictures are combined in a multiscreen window on monitor A, B, or both. Monitor A Monitor A is the main monitor.
Divar 700 Series Operating instructions | en 6 Multiscreen To view different multiscreen displays on monitor A or B: 1. 2. Press the multiscreen key. – A multiscreen display of camera pictures appears on the active monitor. – The camera keys of the selected cameras light (green). Press the multiscreen – key again to go to the next programmed multiscreen view. Continue to press the multiscreen key; the unit cycles through all enabled multiscreen views.
en | Operating instructions Divar 700 Series Zoom To zoom in on a video image: 1. Press the zoom – key. The picture is enlarged by a factor of 2. 2. Use the arrow keys to select the area of the picture to be displayed. 3. Press the zoom – key again to zoom in further. The picture is enlarged by a factor of 4. 4. Use the arrow keys to select the area of the picture to be displayed. 5. Press the zoom key again to return to a full picture and leave the zoom mode.
Divar 700 Series Operating instructions | en 8 Overview of the menu system The menu gives access to several functions to help use the unit. Access to some menu items is password protected. There are three ways of accessing the menu system: – via the front panel keys, – the USB mouse, or – a Intuikey keyboard. Slight differences in navigation and selection are only due to the differences between the keys on the unit, the keyboard and the mouse. The menu structure is the same in all cases.
en | Operating instructions Divar 700 Series Help The Help function displays a help text. Exit Click to log off. Access using the front panel keys To open the menu, press the menu – key. The top menu appears on monitor A. To move through a menu or list, use the arrow keys on the front panel. To select a submenu or item, use the enter To go back, use the escape key. key To open the help text, press the help key. To exit the menu, press the escape key.
Divar 700 Series Operating instructions | en 10 Date/time search Enter the start date and time and click OK to start playback. Playback of the displayed cameos starts. Figure 6 Search by date and time Search Figure 7 Bosch Security Systems Search menu - Events Operations manual F.01U.140.955 | v3.0 | 2009.
en | Operating instructions Divar 700 Series Events search criteria – Under Start time and End time, fill in date and time values to determine the time span of – To set the Search direction, select Forward to search from start time to end time or the search. Backward to search from end time to start time. – Under Video inputs, check the inputs to search for (highlight the un-numbered box to select all). The selected inputs are highlighted.
Divar 700 Series Operating instructions | en 3. To activate or clear the entire area, select one of the following: – 4. 12 Draw all cells to activate the entire motion detection area. – Erase all cells to clear the entire motion detection area. – Check the Show grid box to outline grid zones. Select Search to start the search. Figure 9 Search menu - Search results Search results – The recording fitting the filter and closest to the selected date and time is shown first.
en | Operating instructions Figure 11 – Divar 700 Series Export video menu Choose a memory device from the Destination selection box. Media status displays the status of the selected memory device; Free space displays the available space for archiving. Select Erase to empty the selected memory device. – A list of the video segments to be archived is displayed. – To add a video segment to the list, click Add. Fill in a Start time and End time for the video segments to be archived.
Divar 700 Series Operating instructions | en 14 Configuration Figure 12 Top menu - Configuration The Configuration menu is accessed from the top menu. The Configuration menu contains three submenus: – Quick Installation - opens a wizard to configure basic settings. For more information refer to Section 3 Quick install. – Advanced configuration - opens the advanced configuration menu to configure all – Monitor Settings - opens a menu to configure monitor settings. settings.
en | Operating instructions Figure 13 Divar 700 Series Configure monitors menu - Sequence Sequence Select the length of time a camera remains visible on screen (1 to 60 seconds) in the Sequence dwell time field. Use the the Add button to move camera inputs to the sequence list. Use the Move up or Move down buttons to put them in the desired order. Use Remove to clear a single item from the sequence list. Use Erase to clear all items from the sequence list.
Divar 700 Series Operating instructions | en 16 System information Figure 14 Top menu - System information The System information menu is accessed from the top menu. The System information menu contains two submenus: – Status - opens a menu to view status information. – Logbook - opens a menu to view the system log. Status The Status submenu contains five tabs displaying status information.
en | Operating instructions Divar 700 Series – Earliest recording - displays date and time of the earliest (oldest) recording on disk. – Latest recording - displays date and time of the latest (newest) recording on disk. – Total Disk Size - displays the total installed disk space. – RAID status - displays enabled if the disks are used as a RAID array. – Time till overwrite appr. - estimated time video is retained until overwriting. – Authenticity check...
Divar 700 Series Operating instructions | en 18 Logbook The logbook menu is used to display a filtered history of system events. Logbook filter Set various filter criteria to search in a specified time period for various system events. Figure 16 Logbook menu - Logbook filter – Enter start and end times. – Make a selection of which system events to show. – Logbook contents - shows the earliest and latest available log contents. – Show - click to show the results.
en | Operating instructions Divar 700 Series Event handling Various types of events change the way the unit works. These events are: – a contact input signal applied to the unit; – motion detection in a camera signal; – a loss of video from one of the cameras; – an internal alert from the unit itself (i.e. disk failure, temperature alarm). The way the unit reacts to events depends on how it is programmed.
Divar 700 Series Operating instructions | en 20 Contact inputs If a contact input causes an alarm – Monitors A and B (hybrid version only) can display an array of pre-selected cameras. – Monitor A: The border around the displayed cameos is red. The alarm icon is displayed in the corresponding cameo. An alarm status message is displayed. – The alarm beeper sounds. The alarm and the indicators flash. – Controllable cameras might be moved to pre-defined positions.
Bosch Security Systems www.BoschSecurity.
