User Manual

DIVAR IP all-in-one 7000 2U | DIVAR IP all-in-one
7000 3U
Introduction | en 5
Bosch Security Systems B.V.
User manual
2021.10 | V02 | DOC
2 Introduction
Operating modes
The DIVARIPall-in-one systems can operate in three different modes:
– Full video recording and management system, utilizing the BVMS and VRM core
components and services: This mode allows for advanced video management features
such as event and alarm handling.
– Pure video recording system, utilizing the VRM core components and services.
– iSCSI storage expansion for a BVMS or VRM system, which runs on a different hardware.
i
Notice!
Recorded video streams need to be configured in a way that the maximum bandwidth of the
system (BVMS/VRM base system plus iSCSI storage expansions) is not exceeded.
DIVAR IP Software Center
DIVAR IP Software Center is the central user interface for software setup, upgrade and
operation mode selection.
After installation of DIVAR IP Software Center you must choose the desired operation mode to
configure your system.
With DIVAR IP Software Center you can also update and upgrade the installed software.
You can find the latest software and available upgrade packages in the Download Area of
Bosch Security and Safety Systems under:
https://downloadstore.boschsecurity.com/