Specifications

! Old appliances are not worthless
rubbish. Valuable raw materials can be
reclaimed by recycling old appliances.
Before disposing of your old appliance, ren-
der it unusable.
! Yo u rec ei ve d yo ur n ew a pp li an ce i n a
protective shipping carton. All packaging
materials are environmentally friendly and
recyclable. Please contribute to a better
environment by disposing of packaging
materials in an environmentally-friendly
manner.
Please ask your dealer or inquire at your
local authority about current means of
disposal.
! The extractor hood can be used in
exhaust air or circulating air mode.
! Always mount the extractor hood over
the centre of the hob.
! Minimum distance between electric hob
and bottom edge of extractor hood:
650 mm.
!The extractor hood must not be
installed over a solid fuel cooker – a
potential fire hazard (e.g. flying sparks) –
unless the cooker features a closed,
non-removable cover and all national
regulations are observed.
! The smaller the gap between the
extractor hood and hotplates, the greater
the likelihood that droplets will form on the
underside of the extractor hood.
Additional information concerning gas
cookers:
! When installing gas hotplates, comply
with the relevant national statutory
regulations (e.g. in Germany: Technische
Regeln Gasinstallation TRGI).
! Always comply with the currently valid
regulations and installation instructions sup-
plied by the gas appliance
manufacturer.
! Only one side of the extractor hood may
be installed next to a high-sided unit or high
wall. Gap at least 50 mm.
! Minimum distance on gas hotplates
between the upper edge of the trivet
and lower edge of the extractor
hood: 650 mm.
min 650
Installation Instructions:
Important information
23
5750.197 457+458.Bo/Si.qxd 24.01.2005 10:08 Uhr Seite 23