Instruction manual

Bosch Security Systems | November 17, 2004

DÉSA

| Instruction Manual | System Setup Options

8.11.3.1 Setup Backup Schedule

Click Add to add a schedule. The Add schedule window

below is displayed.

1. Title is the name of the schedule being set.

2. Date/Time is the desired time frame for the backup

to occur.

NOTE: Date/Time is limited to a 24-hour period, and

must be for future dates only.

ALERT!

Scheduled Backup will not overwrite when the storage

media gets full. Please ensure there is sufficient free space

before configuring and starting the backup at all times.

20 GB of free space is suggested for every hour of backup.

The Scheduled Backup will stop functioning if storage media

is full, and backup will not be completed.

If Scheduled Backup stops because storage media is full, to

resume the Scheduled Backup you must:

(1) Delete contents of the storage media,

(2) Delete the Scheduled Backups that were stopped, and

(3) Reconfigure all Schedules.

3. The Rotate option is used to schedule a backup on a regular basis.

Options are: None (one time), Weekly, Monthly, and Yearly.

4. Backup start time interval after options are Immediately, or from

1 to 4 hours. Backup time is set for after the End time/date.

5. Media

Click Add media to open the Select backup media box. Select

any Local drive(s), or a Remote drive. For redundancy, multiple

drives can be set as backup locations. The remote password

is the password of the operating system.

NOTE: To backup to a remote drive, the remote software must be

loaded and running (minimized), for remote connection to occur.