Instruction manual

Bosch Security Systems | November 17, 2004

DÉSA

| Instruction Manual | System Setup Options

8.3.4 External Monitor

This screen is used to select cameras to be displayed on the analog monitor

output.

8.3.4.1 Dwell (Sec) is the time that each selected camera will be

displayed during sequence operation. Cameras are available

only if Enabled in Camera Setup.

Synchronize External Monitor: Once cameras have been added and

saved, press this button to reset the sequencing.

8.3.5 PTZ Camera Alarm/Preset Setup

8.3.5.1 This option can only be used if there is a camera with

PTZ selected in Camera Setup.

8.3.5.2 Press Alarm/Preset to display the Setup

screen.

8.3.5.3 Cameras with PTZ selected appear on the

left side of the chart, and across the top are

the sensors (alarm inputs).

8.3.5.4 Click the box intersecting the desired

camera with the appropriate alarm. A

dropdown box with 1-10 presets will appear.

Select the preset to be associated with that

alarm input.

8.3.5.5 The same preset can be assigned to as many

of the cameras or alarm inputs as desired.