Technical data

• DOK-DIAX02-DDC01******-PRJ1-EN-E1,44 • 01.97

1. Introducing the System

1.2. Functional Performance Features

Protection Category IP 65:

• space-saving installation, without a control cabinet, directly at the feeder

• elimination of long connections between motor and drive which are

susceptible to interference

Power shutoff via integrated protection system in DDC:

• power supply isolated by a contactor built into the unit

• direct connection to 220V three-phase power source

• a longer lifespan due to currentless switching

Integral DC bus dynamic braking:

• If trouble is encountered in the electronic circuitry of the drive, the drive can

be decelerated and stopped with an integral dynamic brake system.

Inrush current limit:

• The inrush current does not need to be considered when selecting fuses or

circuit breakers for the input power.

Flexibility for specific applications:

• The functions implemented on the drive can be matched to the given

application by installing various plug-in modules in the servo drive.

Motor holding brake:

• Control and monitoring of the holding brake of the motor is integrated inside

the servo drive unit.

Programmable error reactions:

• In the event of power, drive, or system faults, the drive performs the

programmed error reaction.

Easy to service:

• Signal cables are connected via screw terminals.

• Extensive diagnostics via alphanumeric display.