Specifications

Bosch Security Systems B.V.www.boschsecurity.com
Other Applicable Congress Products | 61
G3A Series AutoDome System
Features
X Integral camera pan/tilt and receiver/driver system
X 360 degrees observation
X High-speed pan/tilt operation
X Up to 99 prepositions
Introduction
The G3A Series AutoDome System allows total observation
of a large area with a single camera system. The system,
with its built-in camera, driver and integral highspeed pan
and tilt, provides 360° observation. It is possible to program
the system with up to 99 pre-positions.
Functions
The Bosch G3A Series AutoDome System is ideal for
conference venues. Its powerful auto-focus zoom lens allows
it to produce clear, close-up shots of speaking delegates, in
all sizes of congress venue. The high-speed pantilt operation
means it can quickly switch positions, and the 360° angle of
operation means all seating positions can be covered. It is
comprised of a camera/lens module, a backbox/ power
supply module and a dome module. The dome system is a
compact, lightweight system containing a high-performance
1/4-inch color CCD camera with an 18:1 auto-iris, auto-focus
zoom lens. Additional zoom power is provided by a 12 x
digital electronic zoom. Integral high-speed pan/tilt and
variable speed operation allow accurate, high-speed camera
positioning. The camera, lens and pan/tilt module can easily
be removed from the domed enclosure to simplify
installation and service. The cameras can be either
suspended or in a pendant mount. The camera/lens modules
are available in two versions, the in-ceiling AutoDome kit for
PAL/NTSC and pendant AutoDome kit, including wall mount
for PAL/NTSC.
Direct Camera control
The DCN Next Generation can also be used in the Direct
Camera Control (DCC) mode. A single AutoDome system is
then directly connected to a CCU for automatic camera
control. The video output of the AutoDome system is
connected to a monitor or other video display device. The
DCC mode is available both for DCN Next Generation stand-
alone systems without a control PC and for DCN Next
Generation systems with control PC. Setting AutoDome
system pre-positions in DCN Next Generation systems with
DCC requires use of AutoDome controller, both for DCN
Next Generation stand-alone systems and PC-controlled
DCN Next Generation systems. The DCC mode can only be
used in combination with:
• a Bosch AutoDome
• Central Control Unit DCN-CCU or DCN-CCUB
Technical Specifications
For more information about cameras, refer to the CCTV Data
Book
G3ACS5C G3ACPW2CW
Camera type In-ceiling Pendant
TV standard PAL PAL
Power 24 VAC / 50 Hz 230 VAC / 50 Hz
Clear bubble Yes Yes
Power supply No transformer includ-
ed. Use PSU TC220PSX-
24
Transformer included in Wall
mount
Ordering Information
G3ACS5C Color AutoDome Kit
18x color, indoor drop ceiling, clear dome, 24
VAC, 50 Hz
G3ACS5C
G3ACPW2CW Color AutoDome Kit
18x color, indoor pendant, wall mount, clear
dome, white, 230 VAC, 50 Hz
G3ACPW2CW