Specifications

Bosch Security Systems B.V.
60 | Other Applicable Congress Products
www.boschsecurity.com
LTC 5136 Autodome Controller
Features
X Full-function, ergonomically-designed keyboard
X Variable speed joystick control
Introduction
This AutoDome® Controller provides the same functionality
as an Allegiant Keyboard and Allegiant video switcher to
configure and control a Bosch AutoDome® system. It is
required in DCN Next Generation systems with Direct
Camera Control to preposition an AutoDome® system. The
AutoDome® is temporarily connected for this purpose to the
AutoDome® Controller for setting the prepositions as
required for the different DCN Next Generation microphone
units. After positioning the settings, the AutoDome® system
is connected to the DCN Next Generation CCU. The
AutoDome® Controller is also needed to change the
programmed pre-positions when required.
Functions
Controls and Indicators
• Joystick control
• On-screen display
Technical Specifications
Electrical
LTC 5136/51
Rated voltage 220 to 240 VAC (50/60 Hz)
Voltage range 195.5 to 253 VAC
Power consumption 6W
LTC 5136/61
Rated voltage 120 VAC (50/60 Hz)
Voltage range 105 to 132 VAC
Power consumption 6W
Mechanical
Dimensions (H x W x D) 101x220x155mm
(4 x 8.7 x 6.1 in)
Weight 0.55 kg (1.2 lbs)
Ordering Information
LTC 5136/51 Autodome Controller
with 16 outputs for AutoDomes or for Allegiant
Receiver/Drivers units, 230 VAC, 50/60 Hz
LTC5136/51
LTC 5136/61 Autodome Controller
with 16 outputs for AutoDomes or for Allegiant
Receiver/Drivers units, 110 VAC, 50/60 Hz
LTC5136/61
Mechanical