Specifications

Bosch Security Systems B.V.www.boschsecurity.com
Other Applicable Congress Products | 49
DCN-FCS Flush Channel Selector
Features
X Stylish and modern design (IF award)
X Automatically adapts to available channels
X Built-in “Silent” function
X No audio output until the headphone is connected
X Flush mountable in tabletops, on top or at the front, or in
arm rests of seats
Introduction
The DCN-FCS is a compact and stylish single-user audio
channel selector for listening by headphone. It provides a
choice of up to 32 high-quality audio channels used for
distribution of interpretation and floor channels.
Functions
•
Built-in “Silent” function; no audio output until one of the
keys has been pressed to eliminate audible noise from
the headphones when not in use
• Upon insertion of a headphone the default “floor”
channel (channel 0) is selected with a comfortable
headphone volume and the dimmed backlighting is
activated
Controls and Indicators
• Two push-buttons (up/down) for channel selection
• Two push-buttons (up/down) for headphone volume
control
• Backlit 2-digit LCD for channel number indication
Interconnection
Interconnections
• 3.5mm (0.14in) stereo jack headphone connector
• Connector for external headphone
• 2 m (78.7 in) cable with a molded six-pole circular
connector
• Six-pole circular connector for loop-through
interconnection
Technical Specifications
Electrical
Frequency response 30 Hz - 20 kHz
Headphone Load
impedance
> 32 ohm < 1 k ohm
Output power 2 x 15 mW/32 ohm
Mechanical
Mounting Flush mounted
Dimensions (H x W x D) 40 x 100 x 100 mm (1.6 x 3.9 x 3.9 in)
Weight 0.3kg (0.66lb)
Color Silver (RAL 9022)
Ordering Information
DCN-FCS Flush Channel Selector
flush mounted, silver
DCN-FCS