Technical data

DCN-D Conference Delegate Units Operation | en 21
Bosch Security Systems B.V. Installation and Operation manual F.01U.265.631 | V1.0 | 2012.03
8 Operation
Refer to the Quick Reference Card (QRC) of the used type of delegate unit for instructions
that tell you how to operate the delegate unit. See for QRC’s the DCN system DVD, which
comes with the central control unit.
8.1 Microphone
The color of the LED above the microphone button shows the microphone condition.
Table 8.1 Microphone condition
8.2 Attendance LED
The LED adjacent to voting button 1 is the attendance LED.
Table 8.2 Attendance LED
LED color Condition
Red (on) Microphone enabled
Red (flashing) Last minute of speech time
Green (on) Request-to-speak
Green (flashing) First in request-to-speak list
Yellow (on) VIP mode
NOTICE!
You can only put the delegate unit in the VIP mode with the Microphone Management
software module. Refer to the applicable DCN system software user manual for instructions
that tell you how to enable the VIP mode.
CAUTION!
For the microphones it must be avoided to bend the gooseneck more than 90 degrees or to
rotate a (bent) gooseneck. This will cause damage to the windings of the gooseneck.
Attendance LED Condition
Yellow (flashing) The system requests
attendance registration.
Yellow (on) The attendance registration is
confirmed.