Data Sheet

ManualsBrandsBosch ManualsBurglar AlarmsKit Includes D7412GV4/ D6103/ Lock and Key

Intrusion Alarm Systems | D7412GV4 Control Panel

D7412GV4 Control Panel

www.boschsecurity.com

u Fully integrated intrusion, fire, and access control

allows users to interface with one system instead of

three

u Conettix IP‑based communication options provide

high‑speed, secure alarm transport and control

through connection of wired and/or wireless cellular

network interfaces

u Up to 8 programmable areas each supporting both

with perimeter and interior points with your choice

of touch screen, ATM style, or LED keypads

u 75 points with flexible configuration options to meet

multiple installation requirements

u OPTIONAL GV4 version 2.xx firmware upgrade

available

GV4 panels are the premier commercial control panel

line from Bosch. GV4 panels integrate intrusion, fire

and access control providing one simple user interface

for all systems. With the ability to adapt to large and

small applications, the D7412GV4 provides up to 75

individually identified points that can be split into 8

areas. The control panel includes a communicator that

sends events to selected public switched telephone

network (PSTN), IP network, or cellular network

destinations through four programmable route groups.

With the D7412GV4 you can:

• Monitor alarm points for intruder or fire alarms while

operating keypads and other outputs

• Program all system functions local or remote using

Remote Programming Software (RPS) or by using

basic programming through the keypad.

• Add up to two doors of access control using the

optional D9210C Access Control Interface Module.

Functions

Programmable outputs

• 2 A alarm power at 12 VDC

• 1.4 A auxiliary power at 12 VDC

• Four alarm‑output patterns

• Programmable bell test

System response

• High-performance micro‑controller provides

industry‑leading system response

• High-speed device bus

• 31 custom point indexes, including fire supervisory

• Selectable point response time

• Cross point capability

• Fire alarm verification

• Fire inspector’s local test

• Watch mode

• Scheduled events (SKEDS) arm, disarm, bypass and

unbypass points, control relays, control authority

levels, and control door access

User interface

• Supervision of up to 16 keypads

• Remote Programming Software (RPS) allows end

users to perform control panel management tasks –

Add/Delete/Change user passcodes and authorities,

view and print the panel history event log

• Custom keypad text is fully programmable, including

remote programming

Summary of content (8 pages)

PAGE 1
Intrusion Alarm Systems | D7412GV4 Control Panel D7412GV4 Control Panel www.boschsecurity.com GV4 panels are the premier commercial control panel line from Bosch. GV4 panels integrate intrusion, fire and access control providing one simple user interface for all systems. With the ability to adapt to large and small applications, the D7412GV4 provides up to 75 individually identified points that can be split into 8 areas.
PAGE 2
| D7412GV4 Control Panel • Full function command menu including Custom Functions • Authority by area and 16‑character name for each user • 14 custom authority levels control user’s authority to change, add, or delete passcodes or access control credentials; to disarm or bypass points; and to start system tests Area configurations Area programming offers a wide selection of different system configurations. Each area is assigned an account number to define annunciation, control, and reporting functions.
PAGE 3
| D7412GV4 Control Panel IP Setup is available via the installer keypad menus and the remote programming software, eliminating the need to use complicated internet programming tools such as ARP and Telnet. Communication paths The control panel accommodates up to four separate destinations for primary, alternate, and backup receivers for automatic test reports. When resetting alarms or arming or disarming a system, the user is identified by name and number.
PAGE 4
| D7412GV4 Control Panel • Lock and unlock doors (Bosch VMS 6.0 and higher). Requirements to integrate Bosch VMS with a control panel: • A licensed Bosch VMS system using Professional Editions v5.5 or higher or Bosch VMS Enterprise • Edition v5.5 or higher. • Expansion license to integrate the intrusion control panel. One license needed per control panel. Order number MBX-XINT-xx for the expansion license added to a Bosch VMS base license.
PAGE 5
| D7412GV4 Control Panel Magnetic Contacts Transformers Bosch magnetic contacts include recessed, terminal connection, miniature, overhead door, and surface mount.
PAGE 6
| D7412GV4 Control Panel EN1262 Motion Detector with Pet Immunity Environmental considerations EM1265 360° Ceiling Mount Motion Detector Relative Humidity: 5% to 93% at +30°C (+86°F), non‑condensing Temperature (Operating): 0°C to +50°C (+32°F to +122°F) EN4200 Serial Receiver EN5040-T High Power Repeater with Transformer Number of… Parts included The D7412GV4 includes the following parts: Quant.
PAGE 7
| D7412GV4 Control Panel D7412GV4-C Standard Burglar Package D1238 Battery (12 V, 38 Ah) Contains one PCB, one lock and key set, one transformer, and one universal enclosure. A 12 V sealed lead-acid battery for standby and auxiliary power with two bolt‑fastened terminals. Includes hardware for attaching battery leads or spade connectors. Order number D7412GV4-C D7412GV4-D Burglar Package Contains one PCB, one lock and key set, one transformer, and one D6103 Enclosure.
PAGE 8
| D7412GV4 Control Panel Software Options RPS Kit (DVD-ROM and USB Security Block) Account management and control panel programming software with USB security key (dongle). Order number D5500C-USB Represented by: Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 emea.securitysystems@bosch.com emea.boschsecurity.com North America: Bosch Security Systems, Inc.