User`s guide

D621 Series | User's Guide | System Test (Cmd 41)
Bosch Security Systems | 8/04 | 43
As the system tests each bell, strobe, battery, and system’s
communication, the corresponding point indicator displays
the stage of each test. Refer to Table 9.
Table 9: System Test Point Status
Point Testing Status
Flash Slow Testing Segment Underway
Flash Fast Testing Segment Failed
On Testing Segment Complete
4. When the test is complete, the keypad automatically exits
this command.
5. To stop the test currently in progress and skip to the next
test, press the [*] key. To abort all system tests and return
to the normal display, press the [Cmd] key.