Specifications

D1256/D1257
Installation
D1256/D1257 Installation Instructions
74-06925-000-B Page 12 © 2000 Radionics
Menu Item and Function
Radionics recommends that you program the first ten menu items as indicated below. The first four menu items
must be programmed as indicated below for the D1256 to function properly. The first four keys on the D1256
annunciator execute the first four menu items turned on at the command center address. Menu items five
through ten are optional features that you may or may not want to program into the D1256 system. Menu items
five through ten are explained in the Fire System User's Guide (P/N 71-06991-000) as optional features. See the
User's Guide for further explanation of these items. Programming of items five through ten are optional.
Menu Item Function Description
1 128
ALARM SILENCE_ _?
2 129
TROUBLE SILENCE ?
3 130
DETECTOR RESET ?
4 131
ANNUNCIATOR RESET
5 9
VIEW _ MEMORY _ ?
6 10
VIEW PT STATUS _ ?
7 12
FIRE_ TEST_ ?
8 21
VIEW LOG _ ?
9 29
REMOTE PROGRAM ?
10 32
DISPLAY _ REV ?
Table 4: Menu/Function List Description
CC Address #
Program command center addresses to YES for the first four menu items and the optionally program menu
items five through ten as YES.
3.3.5 Passcode Worksheet
Passcode Worksheet
User User User Area Auth
Flag Passcode Window 1 2 4 5 6 7 8 User Name
000 00
_ _ _ _ _ _ _ _
15 15 15 15 15 15 15 __________________________________
001 01
1 2 5 6 0
0
_ _
14
__ __ __ __ __ __ __________________________________
Figure 5: Example 4 – Passcode Worksheet
Passcode
A special passcode must be programmed as a valid passcode for the system to work. This passcode is used in
custom functions 128 and 131. Any user number may be used to establish this mandatory valid passcode. It
must additionally be created as a valid passcode in the area the D1256 is assigned to. Radionics recommends
using authority level 14 in conjunction with the passcode you choose (see Authority Level Selections).