Technical data

26 en | Built-in MP3 recorder (CCS-CURD only) CCS 900 Ultro
IOM_CCS900 | V1.0 | 2010.06 Installation and Operating Manual Bosch Security Systems B.V.
7.3.1 Overview of set-up icons
Table 7.2 Overview of icons for navigating set-up screens
Icon Icon name Function of icon
Next (displayed at
lower left of set-up
screen)
Go to next set-up screen. This icon is also displayed at the
top left of the set-up screen to indicate that the other
modes can be selected at any time, by pressing the change
mode button (1).
Select Selects next value to change.
Down Decreases value, or selects another value or file.
Up Increases value, or selects another value or file.
Date Indicates that the date set-up screen is selected.
Time Indicates that the time set-up screen is selected.
Bit rate Indicates that the bit rate set-up screen is selected.
Microphone
recording
Unit will only record if one or more delegate microphones
pick-up a signal, or if a signal is present on a external
input.
Continuous recording Unit will continuous record.
Confirm delete Confirms file to be deleted.
Delete file Permanently deletes selected file.
Cancel delete Cancels the delete file command.
Record to card Sets up recording so that files are saved to the SD card.
Data will still be saved to the internal memory during card
exchange, as described in section 7.4.3.
Record to memory Sets up recording so that files are saved to the internal
memory.
Hourglass Initializing SD card.
SD card status Card flashing at 2 Hz: card is initializing.Card flashing at 5
Hz: card is either: full, write protected, or incompatible.