Technical data

CCS 900 Ultro Installation | en 15
Bosch Security Systems B.V. Installation and Operating Manual IOM_CCS900 | V1.0 | 2010.06
5.11 Connecting a USB cable
Use the optional USB cable to connect the CU (1) to a PC. Data can then be downloaded from
the CU to the PC (CCS-CURD only). See section 7 for more information.
CAUTION!
Do not connect the USB cable and audio output/input to the same PC, otherwise the system
will not work.
CAUTION!
Do not disconnect the USB cable or shut down the Control Unit without following the PC
disconnection procedures.