BSA2...
Use and Care M anual..................................................................... ................................. 3 Notice d’utilisation et d’entretien............................................... ............................... 16 M anual de instrucciones y cuidado............................................................................
Im portant Safeguards Use as directed A n o te This vacuum cleaner is intended for use in the home and not for industrial purposes. The vacuum cleaner must be used exclusively in accordance with the specifications stated in the instructions. The manufacturer shall not be held liable for any damages which arise from use which is not as directed or has been caused by an incorrect operation of the vacuum cleaner. Therefore, please ensure that the following information is observed and heeded.
I Do not use machine as a step. I Do not re-use or wash the filters. I Do not remove any screws. I Do not vaccum up sharp objects to prevent injuries when opening or emptying the appliance. I Do not use a damaged vaccum appliance. I Do operate the appliance only with original dust bags. I Do operate the appliance only by using original spare parts, accessories or optional accessories. Use only as described in this manual.
1 Adjustable floor nozzle* 2 Hard floor nozzle* 3 2-parts steel tube* 4 Combination nozzle 5 Attachment support for the combination nozzle 6 Telescopic tube* 7 Sliding sleeve 8 Hose grip 9 Suction hose 12 Exhaust filter 13 Parking aid 14 Microsan filter 15 Storing aid 16 Dust bag 17 Lid 18 Handle 19 Exhaust grid 20 Dust bag change display 10 Plug 11 On / off switch with electronic suction regulator •Depending on version
starting up Lock the suction hose into the suction opening Connect the handle and the suction tube. Connect the floor nozzle and the suction tube.
Unlock the telescopic tube and adjust to the desired length by moving the adjusting button/sliding sleeve up or down. •Depending on version Slide the attachment support on to the combination nozzle and clip on to the suction / telescopic pipe Take the cord by the plug and pull out the desired length and then plug into the socket.
Set the level of suction by turning the on/off button left or right. Suction Adjusting the floor nozzle: ■ For cleaning rugs and carpet => ""I"""" ■ For cleaning hard floors => adBB This enables an optimum cleaning effect for the different flooring. Vacuuming with accessories (connect to the handle or the suction tube as required) Combination nozzle For vacuuming in corners, joints, upholstery, curtains etc.
Hard floor nozzle For vacuuming hard floor surfaces (tile, wood etc) ‘Depending on version When taking brief vacuuming pauses, you can use the parking aid on the back of the appliance. Push the hook on the floor nozzle in to the recess on the back of the appliance. The appliance can be carried using the two grips. This is especially useful when vacuuming stairs or reaching up to the ceiling.
After use Pull out the plug from the socket. Pull briefly on the cord and then let go (the cord rolls up automatically) To store / transport the appliance, you can use the storing aid on the underside of the appliance. Stand the appliance up straight. Push the hook on the floor nozzle in to the recess on the underside of the appliance. When removing the suction hose, press the latch and pull out the hose.
Changing the filter Replace the dust bag The dust bag change display on the lid turns yellow, when it’s time to replace the bag. Open the covering by lifting up on the lever. Seal and remove the dust bag by pulling on the cover clip Insert the new dust bag in the holding fixture, up to the stop.
Replacing the Microsan filter (Omitted on vacuum cleaners which have a HEPA filter.) When should I change the filter? Each time a new box of dust bags is opened. ■ Open the covering. ■ Pull out the filter holding fixture and open up. ■ Dispose of the old Microsan filter and insert the new one. ■ Slide the filter holding fixture in and close the covering. Cleaning the motor filter ■ Open the covering. ■ Unlock the insert by pressing in the direction of the arrow and pull out.
a) Push in the insert below the front support ribs and engage. Close the covering. b) Push in the insert below the two lateral support ribs and engage. Close the covering. •Depending on version M aintenance ■ Before the appliance is cleaned, ensure that it has been switched off and unplugged. ■ Vacuum cleaners and accessories made of plastic can be cleaned using a general commercial plastic cleaner. Dp not use sciHtring agents, glass of aK<;putpQse jc^ners.
Spare parts and optional extras Dust bag MEGAfilt® BBZ51AFGUC Contents: 5 X dust bags MEGAfilt® with fasteners and 1 Microsan filter HEPA Filter BBZ8SF1UC additional filter for pure exhaust air. Recommended for those with allergies. Replace every year. Micro-Motivated Charcoal filter BBZ8KF1 DC Combination of micro filter and activated charcoal filter. The thick layer of activated charcoal prevents any disturbing odors for a long period of time (replace every 6 month).
BOSCH Sm all Appliance W arranty BSH Home Appliances («BOSCH») warrants all new small appliances to be free from original defects in design, materials and workmanship for one (1) year after the sale to the original owner. Within the stated warranty period, BOSCH will repair or replace, at its sole option, any small appliance or parts thereof which prove defective under the conditions of normal use and service at no charge to you. It is the owner's responsibility to return the appliance for repair.
BSH Home Appliances Corporation 5551 McFadden Avenue Huntington Beach, CA 92649 USA Web site: \«ww.boschvacuums.
