3FHJTUFS \R QHZ GHYLF XU 0\%RVFK H RQ QRZ DQG JHW IUHH E HQ CPTDI IP HILWV NF DPN XFMDPNF Washing machine WAU28460MY en Instruction Manual and Installation Instructions
Your new washing machine Display rules You have chosen a Bosch washing machine. : Warning! Please take a few minutes to read and become familiar with the advantages of your washing machine. This combination of symbol and signal word indicates a possibly dangerous situation. Not heeding the warning can cause death or injuries.
en Contents enI structionManual ndInstal tionI structions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 Detergent . . . . . . . . . . . . . . . . . . 24 Correct selection of detergent . . . . . .24 Saving energy and detergent . . . . . .25 Children/people/pets . Installation. . . . . . . . . . Operation . . . . . . . . . . Cleaning/Maintenance ..5 ..6 ..8 . 10 / Overview of programmes . . . . . 26 0 Programme default settings. . .
en Intended use Drum . . . . . . . . . . . . . . . . . . . . . . . . 37 Descaling. . . . . . . . . . . . . . . . . . . . . 38 Detergent drawer and housing . . . . 38 Detergent solution pump blocked . . 38 The drain hose at the siphon is blocked . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Filter in the water supply is blocked 40 8 Intended use ■ Intedus ■ 3 Faults and what to do about them . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Emergency release . . . . . . . . . . . . .
Safety instructions ( Safety instructions The following safety information and warnings are provided to protect you from injury and to prevent material damage to your surroundings. It is nevertheless important to take the necessary precautions and to proceed with care when installing, maintaining, cleaning and operating the appliance.
en Safety instructions : Warning Risk of poisoning! Detergents and care products may result in poisoning if consumed. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children. : Warning Risk of burns! When washing at high temperatures, the glass in the appliance door becomes hot. Stop children from touching the appliance door when it is hot. : Warning Eye/skin irritation! Contact with detergents or care products may cause eye/skin irritation.
Safety instructions : Warning Risk of electric shock/fire/ material damage/damage to the appliance! If the appliance's mains cable is altered or damaged, this may result in electric shock, short circuiting or fire due to overheating. The mains cable must not be kinked, crushed or altered, and must not come into contact with any heat sources.
en Safety instructions Caution! Material damage/damage to the appliance ■ If the water pressure is too high or too low, the appliance may not be able to operate properly, and it may also result in material damage or damage to the appliance. Make sure that the water pressure in the water supply facility is at least 100 kPa (1 bar), and does not exceed 1000 kPa (10 bar).
Safety instructions : Warning Risk of poisoning! Poisonous fumes may be given off by cleaning agents that contain solvents, e.g. cleaning solvent. Do not use cleaning agents that contain solvents. : Warning Risk of injury! If you support your weight/sit on the appliance door when it is open, the appliance may tip over, which may result in injury. Do not support your weight on the appliance door when it is open.
en Safety instructions Cleaning/Maintenance : Warning Risk of death! The appliance is powered by electricity. There is a risk of electric shock if you come into contact with live components. Therefore please note: ■ ■ ■ ■ ■ ■ Switch off the appliance. Disconnect the appliance from the power supply (pull out the plug). Never take hold of the mains plug with wet hands.
Environmental protection 7 Environmental protection Packaging/used appliance Tips on economical use ■ Enviromentalprotecion ) Dispose of packaging in an environmentally-responsible manner. The following Do’s and Don’ts provide a framework for the return and recycling of used products when available in your area.
en Positioning and connecting 5 Positioning and connecting A B Standard accessories Posit onigadconetig Note: Check the appliance for transport damage. Never use a damaged appliance. If you have any complaints, contact the dealer from whom you purchased the appliance or our Customer Service.
Positioning and connecting ■ ■ When the washing machine is lifted by its protruding parts (e.g. the washing machine door), the components may break off and cause injuries. Do not lift the washing machine by protruding parts. If the hose and mains cables are not routed properly, there is a risk of tripping and injury. Lay hoses and cables in such a way that there is no risk of tripping. Caution! Damage to the appliance Frozen hoses may rip/burst.
en Positioning and connecting Removing the transport locks Caution! Damage to the appliance ■ The machine is secured for transportation using transport locks. If the transport locks are not removed, the machine may become damaged when it is operated. Before using the appliance for the first time, make sure that you completely remove all four transport locks. Keep the locks in a safe place.
Positioning and connecting en Water inlet 4. Remove the transport strut. : Warning Risk of death! There is a risk of electric shock if you touch live components. Observe the following when connecting the machine: Notes Only operate the washing machine using cold mains water. ■ Do not connect the machine to the mixer tap of an unpressurised hotwater boiler. ■ Do not use a used supply hose. Only use the supply hose supplied with the machine or one that was purchased from an authorised retailer.
en Positioning and connecting Connection Water outlet 1. Connect the water supply hose to the water tap (¾" = 26.4 mm) and to the appliance: – Model: Standard Caution! Water damage When water is being pumped away, the outlet hose is under water pressure and may slip out of the wash basin or connection point. Secure the outlet hose so that it cannot slip out. Note: Do not kink the water drain hose or put strain on it lengthways.
Positioning and connecting ■ ■ Drainage into a siphon The connection point must be secured using a hose clamp with a diameter of 24-40 mm (available from specialist dealers). Outlet into a plastic pipe with rubber bushing or into a drainage pit en Levelling Level the appliance using a spirit level. Incorrect levelling may result in intense noise, vibrations and "wandering". 1. Loosen the lock nuts using a wrench, by turning it in a clockwise direction. 2.
en Positioning and connecting Electrical connection : Warning Risk of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. Observe the following information and ensure that: Notes ■ The mains voltage and voltage indicated on the appliance (rating plate) are the same. The connected load and fuse required are specified on the rating plate.
Positioning and connecting Transportation e.g. when moving home Preparatory work: 1. Turn off the water tap. 2. Reduce the water pressure in the supply hose. Maintenance – filter in the water supply ~ Page 40 3. Disconnect the washing machine from the main plug. 4. Drain the remaining detergent solution. Maintenance – detergent solution pump blocked ~ Page 38 5. Remove the hoses. en Before switching on the appliance again: Notes ■ The support struts must be removed. ■ The transport locks must be removed.
en Getting to know the appliance * Getting to know the appliance Appliance Getingtoknwtheaplince # 6 ( 0 8 20 Detergent dispenser Control panel Door 7 9S Open the door 9T Close the door @ Service flap
Getting to know the appliance en Control panel You can find possible programme default settings and additional programme settings in the overview; these differ depending on the model. ( Programme default settings can be changed. Overview of all programme default settings ~ Page 30 0 additional programme settings can be selected. Overview of all additional programme settings ~ Page 31 8 Start button for starting, interrupting, (e.g. adding laundry) and cancelling a programme.
en Getting to know the appliance Display panel In the table you can find possible settings and information in the display panel; these differ depending on the model.
Laundry Z Laundry ■ Prepare the laundry Laundry Caution! Damage to the appliance/fabrics Foreign objects (e.g. coins, paperclips, needles, nails) may damage the laundry or components in the washing machine. You should therefore note the following tips when preparing your laundry: ■ Empty any pockets. ■ Soiling Wash laundry with the same level of soiling together. Some examples of soiling levels can be found in the chapter – Light: Do not need to pretreat, select the G Speed setting if necessary.
en Detergent Starching Note: Laundry should not be treated with fabric softener. Liquid starch can be used to stiffen fabrics particularly in the Rinse and Cottons programmes. Measure starch into compartment M in accordance with the manufacturer's instructions (clean first if necessary). C Detergent Correct selection of detergent Detrgn The care label is crucial to ensure correct detergent selection, temperature and laundry treatment.
Detergent en Saving energy and detergent For light and normal soiling, you can save energy (lower washing temperature) and detergent. Saving Soiling/note Reduced temperature and detergent quantity as per the recommended dosage Light No visible dirt or stains. Clothing has taken on some body odour, e.g.
en Overview of programmes / Overview of programmes Overiwofprgames Programme/Type of washing Options/Information Name of the programme Brief explanation of the programme and for which fabrics it is suitable. Max.
Overview of programmes Programme/Type of washing Options/Information “ Delicates/Silk For delicate, washable textiles, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. silk blouses, silk scarf). Note: Use a detergent suitable for appliance-washing delicates or silk. Max. 2.0 kg en — - 40 °C - - - -, 0 - 800 rpm G Speed, F Eco, % Soaking, ë Water/Rinse Plus possible l W Wool Hand or appliance-washable wool or rich-wool textiles.
en Overview of programmes Programme/Type of washing Options/Information Drum Clean Û Special program for drum hygiene or fluff removal. Do not load any laundry. 90°C = antibacterial program. 40°C = antibacterial program, special drum cleaning detergent can be used. — = no antibacterial programme, to remove hair or fluff from the tub. Notes ■ Switching the drum-clean information signal on/off. ■ Select 90°C antibacterial program, always follow the manufacturer's instructions when dosing the detergent.
Overview of programmes Programme/Type of washing en Options/Information AllergyPlus ; Max. 6.5 kg For cleaning cotton and linen fabrics that have particularly strict — - 60 °C hygienic requirements (e.g. for people with allergies). - - - -, 400 - 1400 rpm G Speed, F Eco, % Soaking, ë Water/Rinse Plus possible Outdoor Plus ê Weatherproof and outdoor clothing with membrane coating and water-resistant textiles. Max. 1.0 kg — - 40 °C 400 - 800 rpm G Speed, F Eco, ë Water/Rinse Plus not possible Max. 2.
en Programme default settings 0 Programme default settings Note: You can find possible programme default settings in the overview; these differ depending on the model. Progamedfault seings The programme default settings for all programmes are preset at the factory and are displayed in the display panel after the programme is selected. Temperature (6 Temp.
Additional programme settings Note: The length of the program is automatically adjusted when the program is running. Certain factors can affect the program length, e.g.: ■ Program settings, ■ Detergent dosage (additional rinse cycles if required due to foaming), ■ Load size/type of textiles (longer washing for higher load and for textiles which absorb more water), ■ Imbalances (e. g.
en Operating the appliance 1 Operating the appliance Note: Install and connect washing machine properly. Before the 1st wash ~ Page 18 Operatingheaplince Preparing the washing machine Notes ■ Never switch on a damaged washing machine! ■ Inform customer service! 1. 2. 3. 4. Connect the mains plug. Turn on the tap. Open the door. Check that the drum is completely emptied. Empty if necessary.
Operating the appliance Notes Mix items of laundry of varying sizes. Laundry items of different sizes distribute themselves better during the spin cycle. Individual items of laundry may lead to imbalances. ■ Observe the specified maximum load. Overfilling has a negative impact on the washing result and promotes creasing. ■ 1. Place presorted items of laundry unfolded in the washing drum. 2.
en Operating the appliance Notes ■ Dilute viscous fabric softener and fabric conditioner with water. This will prevent blockages. ■ Be careful when opening the detergent drawer while the appliance is running. Measuring aid A* for liquid detergent * Depending on the model Position the measuring aid for measuring the correct amount of liquid detergent: 1. Pull out the detergent drawer. Insert the liquid detergent container into dispenser II for main wash. 2.
Operating the appliance Adding/removing laundry Cancel the programme Following the start of the program, you can add or remove laundry as required. Press the A Start/Reload button to do this. The A Start/Reload button indicator lamp flashes and the machine checks whether it is possible to add laundry. For programs at high temperature: 1. Press the A Start/Reload button. 2. To cool down laundry: Select à Rinse. 3. Press the A Start/Reload button.
en Setting the signal Removing laundry/switching off the appliance 1. Open the washing machine door and remove the laundry. 2. Turn the programme selector to Off. Appliance is switched off. 3. Turn off the tap. Not required for Aqua-Stop models. Contents of package Notes – Do not leave any items of laundry in the drum. They may shrink in the next wash or discolour another item. – Remove any foreign objects from the drum and the rubber seal – risk of rusting.
Sensors Changing the volume Use the ñ Finished In button to change the following settings at the corresponding program selector positions: ■ 2: The volume of the information signals and/or ■ 3: The volume of the button signals. 0 = off, 1 = quiet, 2 = medium, 3 = loud, 4 = very loud Exiting setting mode You can now end the process and set the program selector to the Off position. The settings are saved.
en Cleaning and maintenance Descaling Descaling should not be necessary if the detergent is measured out correctly. However, if it is required, follow the manufacturer's instructions for the descaling agent. Suitable descalers can be obtained via our website or from our after-sales service. ~ Page 44 Detergent drawer and housing If the detergent drawer contains detergent or fabric softener residues: 1. Pull out the detergent drawer. Press down the insert and fully remove the drawer. 2.
Cleaning and maintenance 6. Carefully unscrew the pump cover, residual water may leak out. Clean the interior, pump cover thread and pump housing. The impeller in the detergent solution pump must be able to rotate. Refit the pump cover and screw it on tightly. The handle must be in a vertical position. 7. Place the service flap back on, lock it into place, and close it. en The drain hose at the siphon is blocked 1. Switch off the appliance. 2. Disconnect the mains plug. 3. Loosen the hose clamp.
en Faults and what to do about them Filter in the water supply is blocked First, reduce the water pressure in the supply hose: 1. Turn off the tap. 2. Select any program (except 0 Spin). 3. Press the A Start/Reload button. Allow the program to run for approximately 40 seconds. 4. Turn the program selector to off position. 5. Pull out the mains plug. 6. Clean the filter on the tap: Disconnect the hose from the tap. Clean the filter with a small brush.
Faults and what to do about them en Information on the display panel Display Cause/Remedy Õ ■ ■ r ■ ■ Flashes fast + warning signal: The door was opened and the water level is too high. Close the door, continue the programme with A Start/Reload button or select 0 Spin programme. Flashes slowly: The door lock temperature is too high to open the door. Wait approx. 30 seconds until the door lock temperature cools down.
en Faults and what to do about them Faults and what to do about them Faults Water is leaking from the machine. The machine is not filling with water. Detergent is not being dispensed. Cause/Remedy ■ ■ ■ ■ ■ ■ The door cannot be opened. ■ ■ ■ ■ The program will not start. ■ ■ ■ Attach the drain hose correctly or replace it. Tighten the screw connection of the drain hose.
Faults and what to do about them en Faults Cause/Remedy Odours in the washing machine. Depending on the model, run the Drum Clean Û 90 °C or i Cottons 90 °C program without laundry. Add washing powder or a detergent containing bleach. Note: To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergents designed for wool or delicates. The Å symbol lights up in the display panel. Foam may also be leaking from the detergent drawer.
en After-sales service 4 After-sales service If you cannot correct the fault yourself ~ "Faults and what to do about them" on page 40 please contact our aftersales service. ~ Back page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. Please give the after-sales service the product number (E no.) and the production number (FD) of the appliance.
Supplementary sheet for the installation and operating instructions en [ Consumption values table Energy and water consumption, programme duration and residual moisture for the main washing programme (approximate values) Suplemntaryshet fortheinstaltionadpertingstrucions Programme Load Energy consumption* Water consumption* Programme duration* i Cottons 20 °C 10 kg 0,39 kWh 90 l 3h i Cottons 40 °C 10 kg 1,29 kWh 90 l 3^ h i Cottons Eco 40 °C ** 5 kg 0,47 kWh 47 l 6h i Cottons Eco 60 °
en Technical data J Technical data Dimensions: 848 mm x 598 mm x 590 mm (height x width x depth) Weight: 79 kg Mains connection: Nominal voltage 220-240V, 50 Hz Minimum installation protection (c)10 A Nominal power 1900-2300 W Water pressure: 100–1000 kPa (1–10 bar) cTehnialdt 46
6
Thank you for buying a Bosch Home Appliance! Register your new device on MyBosch now and profit directly from: • • • • • Expert tips & tricks for your appliance Warranty extension options Discounts for accessories & spare-parts Digital manual and all appliance data at hand Easy access to Bosch Home Appliances Service Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here.
