Bosch High Performance HD LED Monitors UML-193-90 | UML-223-90 en User's Manual
Bosch HD LCD Monitors Table of Contents | en 3 Table of Contents 1 Safety 5 1.1 Important safety instructions 5 1.2 Safety precautions 8 1.3 Important notices 8 1.4 Customer Support and Service 2 Unpacking 17 2.1 Parts List 17 3 Access and Connections 18 3.1 Front Control Panel 18 3.2 Bottom Panel 19 4 Description 20 15 4.1 Features 20 4.2 Power 21 5 Installing the Monitor 22 5.1 Ventilation 22 5.2 Desktop Installation 22 5.3 Connecting Power 23 5.
en | Table of Contents Bosch HD LCD Monitors 6 Navigating the Monitor 25 6.1 Navigating the Front Panel 25 6.2 Using the Monitor On-screen Display (OSD) 26 6.3 On-screen Display Menus 27 6.4 Image Menu 28 6.5 Display Menu 29 6.6 Sound Menu 30 6.7 System Menu 31 7 Power Management 33 7.1 Power Consumption 33 7.2 LED Indicator 33 8 Troubleshooting 34 9 Maintenance 36 10 Technical Specifications 37 F.01U.272.027 | 1.0 | 2012.
Bosch HD LCD Monitors Safety | en 1 Safety 1.1 Important safety instructions 5 Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist flufffree cloth or leather shammy may also be used.
en | Safety Bosch HD LCD Monitors disconnect the cable system. This will prevent damage to the unit from lightning and power line surges. 7. Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure. 8. Overloading - Do not overload outlets and extension cords.
Bosch HD LCD Monitors Safety | en 7 13. Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as: – the power supply cord or plug is damaged; – exposure to moisture, water, and/or inclement weather (rain, snow, etc.
en | Safety 1.2 Bosch HD LCD Monitors Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation.
Bosch HD LCD Monitors Safety | en 9 Coax grounding: – Ground the cable system if connecting an outside cable system to the unit. – Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source. – Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal.
en | Safety Bosch HD LCD Monitors ESD safety precautions when handling the electrostaticsensitive printed circuit boards. Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60). Grounding and polarization - This unit may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other blade).
Bosch HD LCD Monitors Safety | en 11 Rack-mount – Ventilation - Do not place this unit in a built-in installation or rack without proper ventilation or adhering to the manufacturer's instructions. The equipment must not exceed its maximum operating temperature requirements. – Mechanical loading - Properly mount the equipment in a rack to prevent a hazardous condition due to uneven mechanical loading. SELV All the input/output ports are Safety Extra Low Voltage (SELV) circuits.
en | Safety Bosch HD LCD Monitors NOTICE! This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. FCC & ICES Information (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules.
Bosch HD LCD Monitors Safety | en 13 Informations FCC et ICES (modèles utilisés aux États-Unis et au Canada uniquement) Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux conditions suivantes : – cet appareil ne peut pas provoquer d'interférence nuisible – cet appareil doit pouvoir tolérer toutes les interférences et auxquelles il est soumit, y compris les interférences qui pourraient influer sur son bon fonctionnement.
en | Safety Bosch HD LCD Monitors Disclaimer Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.
Bosch HD LCD Monitors Safety | en 15 NOTE! This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described. 1.
en | Safety Bosch HD LCD Monitors Asia Region Repair Center Telephone: 65 63522776 Fax: 65 63521776 E-mail: rmahelpdesk@sg.bosch.com Customer Service Telephone: 86 (0) 756 7633117 or 86 (0) 756 7633121 Fax: 86 (0) 756 7631710 E-mail: customer.service@cn.bosch.com Warranty and more information For additional information and warranty queries, please contact your Bosch Security Systems representative or visit our website at www.boschsecurity.com. F.01U.272.027 | 1.0 | 2012.
Bosch HD LCD Monitors 2 Unpacking | en 17 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service.
en | Access and Connections Bosch HD LCD Monitors 3 Access and Connections 3.1 Front Control Panel Figure 3.1 Ref. # Button/Part 1 SOURCE 2 MENU 6 AUTO / UML-193-90/UML-223-90 Front Panel Description Selects the signal to be displayed. Opens the on-screen display (OSD) menus. Adjusts the value when in the Scrolls down in the OSD. OSD. Activates the Auto Adjustment 5 function when in PC mode. Adjusts the value when in the 3 OSD. OSD.
Bosch HD LCD Monitors 3.2 Access and Connections | en 19 Bottom Panel Figure 3.2 Ref. 1 2 3 4 5 6 Bottom View (I/O Panel) Connector Upgrade PC Stereo IN (VGA and DVI In) VGA IN DVI IN HDMI IN DC 12V Bosch Security Systems, Inc. User's Manual F.01U.272.027 | 1.0 | 2012.
en | Description 4 Bosch HD LCD Monitors Description The Bosch High Performance Family of LCD monitors display PAL or NTSC standard color pictures in CCTV systems. The monitors include: an analog VGA input using a 15-pin D-sub connector to accommodate the increasing use of PCs and digital video devices in security applications, a High Definition Multimedia Input (HDMI) and DVI connectors. You access monitor control functions from the push buttons and the onscreen display (OSD) menus.
Bosch HD LCD Monitors – 4.2 Model No.
en | Installing the Monitor 5 Bosch HD LCD Monitors Installing the Monitor This chapter outlines the procedures to install the monitor. A qualified service person should install the monitor and adhere to all local codes. 5.1 Ventilation To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered. 5.2 Desktop Installation Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off. 1.
Bosch HD LCD Monitors 2. Installing the Monitor | en 23 Position the monitor: a. The viewing angle of the LCD can be adjusted to fit the most comfortable viewing position. (Tilt Range: 3°~15°) -3˚ 5.3 15˚ Connecting Power The Bosch Flat Panel CCTV monitors are delivered with a 3-pole US-style power cord and a 3-pole Euro-style power cord. Use the US-style power cord where 120 VAC, 60 Hz power is available; use the Euro-style power cord where 230 VAC, 50 Hz power is available.
en | Installing the Monitor 5.5.1 Bosch HD LCD Monitors HDMI Connection The monitor can be connected to the HDMI (High Definition Multimedia Input) by connecting a HDMI cable (not supplied). Figure 5.1 5.5.2 HDMI Input DVI Connection The monitor can be connected by using the supplied DVI-D cable and connecting it to the digital DVI-D signal. Figure 5.2 5.5.
Bosch HD LCD Monitors Navigating the Monitor | en 6 Navigating the Monitor 6.1 Navigating the Front Panel 25 Use the front panel to make any necessary OSD adjustments. See the figure below for an explanation of the front panel. Figure 6.1 Ref. # Button/Part 1 SOURCE 2 MENU 6 AUTO / Front Panel Buttons Description Selects the signal to be displayed. Opens the on-screen display (OSD) menus. Adjusts the value when in the Scrolls down in the OSD. OSD.
en | Navigating the Monitor 6.2 Bosch HD LCD Monitors Using the Monitor On-screen Display (OSD) The LCD is programmed through the on-screen display (OSD) menus and submenus where an operator can select operating parameters. To access the OSD menus, press the Menu button on the control panel. Use these controls to make any necessary adjustments to the OSD. NOTICE! When you are navigating through the OSD menus, use the SOURCE or ENTER button to select a menu and use the MENU button to exit a menu.
Bosch HD LCD Monitors 6.3 Navigating the Monitor | en 27 On-screen Display Menus There are four (4) on-screen menus that allow you to customize your settings. Press the Menu button to access the OSD menu. Icon Menu Image Function Adjusts the Brightness, Contrast, Color Temperature, Zoom, and Information Bar settings. Display Adjusts the Auto adjust, Phase, Clock, Display position and Auto color settings. (PC mode.) Sound Adjusts the Volume and Mute settings.
en | Navigating the Monitor 6.4 Bosch HD LCD Monitors Image Menu To access the Image menu, press the Menu button on the front panel of the monitor, then press the Up and Down arrow buttons to select the Image icon. Press the Left arrow button to enter the menu, and then press the Up and Down arrow buttons to select a submenu. When finished, press the Menu button to save any changes, then press the Menu button again to exit the OSD. Image Brightness Contrast Color Temp.
Bosch HD LCD Monitors 6.5 Navigating the Monitor | en 29 Display Menu To access the Display menu, press the Menu button on the front panel of the monitor, then press the Up and Down arrow buttons to select the Display icon. Press the Left arrow button to enter the menu, and then press the Up and Down arrow buttons to select a submenu. When finished, press the Menu button to save any changes, then press the Menu button again to exit the OSD.
en | Navigating the Monitor 6.6 Bosch HD LCD Monitors Sound Menu To access the Sound menu, press the Menu button on the control panel of the monitor, then press the UP and Down arrow buttons to select the Sound icon. Press the Left arrow button to enter the menu, and then press the Up and Down arrow buttons to select a submenu. When finished, press the Menu button to save any changes, then press the Menu button again to exit the OSD.
Bosch HD LCD Monitors 6.7 Navigating the Monitor | en 31 System Menu To access the System menu, press the Menu button on the control panel of the monitor, then press the UP and Down arrow buttons to select the System icon. Press the Left arrow button to enter the menu, and then press the Up and Down arrow buttons to select a submenu. When finished, press the Menu button to save any changes, then press the Menu button again to exit the OSD.
en | Navigating the Monitor Reset Firmware Bosch HD LCD Monitors Restores default settings. Displays the release level of the monitor firmware. Version NOTICE! When Key Lock is enabled through the front panel, use the front panel buttons to disable the key lock command. To disable the Key Lock feature using the front panel buttons, press and hold both the Down arrow and the Left arrow buttons until the monitor displays the Key Unlocked message. F.01U.272.027 | 1.0 | 2012.
Bosch HD LCD Monitors Power Management | en 7 Power Management 7.1 Power Consumption Mode Power Consumption UML-193-90 UML-223-90 ON ACTIVE OFF 7.2 33 < 42 W 0.5 W LED Indicator The power management feature of the monitor is comprised of these stages: Mode ON POWER OFF Bosch Security Systems, Inc. LED Color Blue LED Off Monitor Operation Normal Operation Standby Operation User's Manual F.01U.272.027 | 1.0 | 2012.
en | Troubleshooting 8 Bosch HD LCD Monitors Troubleshooting Problem No image displayed on Solution – Check that the power cord of the monitor is screen securely connected into the wall outlet or grounded extension cable or strip. – Power switch should be in the ON position and the LED lit. – Check that the Brightness and/or Contrast adjustments of the display have not been Display image is not turned down to minimum levels.
Bosch HD LCD Monitors Problem Incorrect colors Troubleshooting | en 35 Solution Select a color temperature in the Color Tone menu. - or Use the Reset function to reset to the default The error message “Out settings. PC is operating with either a resolution or timing of Range” is displayed mode that is not supported by the monitor. Change the PC timing mode to one of the valid combinations below: Bosch Security Systems, Inc.
9 en | Maintenance Bosch HD LCD Monitors Maintenance To clean the LCD panel, wipe off water droplets or oil immediately with absorbent cotton or a soft lint-free cloth. Staining and discoloration may occur if left on the panel for long periods. If the surface (polarizer) of the LCD panel is dirty or stained, use absorbent cotton or a soft lint-free cloth to remove the residue as follows: 1. Turn off the display and disconnect it from the power supply. 2.
Bosch HD LCD Monitors 10 Technical Specifications | en 37 Technical Specifications Model LCD Specifications LCD Type Backlight Type Pixel Pitch (H x V) Brightness UML-193-90 UML-223-90 18.51-in. Digital LCD LED 0.3 x 0.3 mm 21.53-in. Digital LCD LED 0.248 x 0.
en | Technical Specifications F.01U.272.027 | 1.0 | 2012.08 Bosch HD LCD Monitors User's Manual Bosch Security Systems, Inc.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc.
