User Manual

Before using for the first time en
33
Accessories Accessory number Use
XXL crevice nozzle BBZ131SA Clean crevices, corners and nar-
row and hard-to-reach places.
Mattress nozzle BBZ133SA Clean mattresses.
Rechargeable battery
1
BHZUB1830 Supply the appliance with
power.
Rechargeable battery
1
BHZUB183CN Supply the appliance with
power.
Quick charger
1
BHZUC18N Charge the 18 V Power for ALL
rechargeable battery.
Quick charger
1
BHZUC18NCN Charge the 18 V Power for ALL
rechargeable battery.
Quick charger
1
BHZUC18NGB Charge the 18 V Power for ALL
rechargeable battery.
Accessory set BHZUKIT
1
Depending on the country version
Before using for the first time
Before using for the
first time
Before using for the first time
Prepare the appliance for use.
Installing the base station
1
WARNING
Risk of electric shock!
Incorrect installation is dangerous.
▶
Check whether any household wir-
ing could be damaged in the in-
stallation area.
▶
Do not install the base station hori-
zontally or vertically above, below
or next to a socket.
1. Remove the front panel towards
the front.
→Fig.
3
2. Wall-mount the base station
1
.
Install the base station
1
close to a
socket.
3. Insert the appliance plug for the
charging cable
1
into the recess in
the base station
1
.
→Fig.
4
4. Guide the charging cable
1
along
the side of the base station
1
and
secure it in the recess.
5. Insert the front panel.
The front panel secures the appli-
ance plug into the base station
1
.
6. Plug the charging cable's mains
plug
1
into the socket.
Inserting and charging the
battery
1. Use the guide rail to insert the bat-
tery into the vacuum cleaner.
→Fig.
5
2. Fully charge the battery.
→"Charging", Page34
1
Depending on the appliance specifications