User Manual

en Cleaning and servicing
36
¡
You can delay the natural wear by
using the following measures:
– Only charge the battery in the
temperature range between
0°C and 45°C.
– Only store the battery in the tem-
perature range between -20°C
and 50°C.
– Do not store the battery for an
extended period of time if it is
fully charged or fully discharged.
Installing the appliance
1. Place the suction pipe onto the ap-
pliance's connection port and lock
it in place.
→Fig.
9
2. Insert the end of the suction pipe
into the floor nozzle and lock it in
place.
Dismantling the appliance
1. Press the release button and pull
the suction pipe out of the floor
nozzle.
→Fig.
10
2. Press the release button and pull
the suction pipe out of the appli-
ance's connection port.
Switching on the appliance
▶
Press
⁠.
→Fig.
11
a The status display lights up white.
Switching off the appliance
▶
Press
.
a The status display goes out.
Using turbo mode
Requirement:The appliance has
been switched on.
→"Switching on the appliance",
Page36
▶
Press
.
→Fig.
12
a The status display flashes white.
Vacuuming with accessories
1. Place the required accessory onto
the suction pipe or the appliance's
connection port.
→Fig.
13
2. After use, insert the accessory into
the base station
1
.
→Fig.
14
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning products
Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Wash sponge cloths thoroughly
before use.
1
Depending on the appliance specifications