Operating instructions

ManualsBrandsBosch ManualsPower Toolsbase 2500

Robert Bosch GmbH

Power Tools Division

70745 Leinfelden-Echterdingen

Germany

www.bosch-pt.com

1 609 929 S19 (2009.01) PS / 180 UNI

GTA 2500 W Professional

de Originalbetriebsanleitung

en Original instructions

fr Notice originale

es Manual original

pt Manual original

it Istruzioni originali

nl Oorspronkelijke

gebruiksaanwijzing

da Original brugsanvisning

sv Bruksanvisning i original

no Original driftsinstruks

fi Alkuperäiset ohjeet

el Πρωτότυπο οδηγιών χρήσης

tr Orijinal işletme talimat

pl Instrukcją oryginalną

cs Původní návod k používání

sk Pôvodný návod na použitie

hu Eredeti használati utasítás

ru Оригинальное руководст-

во по эксплуатации

uk Оригінальна інструкція з

експлуатації

ro Instrucţiuni originale

bg Оригинална инструкция

sr Originalno uputstvo za rad

sl Izvirna navodila

hr Originalne upute za rad

et Algupärane kasutusjuhend

lv Instrukcijas oriģinālvalodā

lt Originali instrukcija

OBJ_BUCH-854-002.book Page 1 Sunday, January 4, 2009 12:44 PM

Summary of content (16 pages)

PAGE 1
OBJ_BUCH-854-002.book Page 1 Sunday, January 4, 2009 12:44 PM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen Germany GTA 2500 W Professional www.bosch-pt.com 1 609 929 S19 (2009.
PAGE 2
OBJ_BUCH-854-002.
PAGE 3
OBJ_BUCH-854-002.
PAGE 4
OBJ_BUCH-854-002.
PAGE 5
OBJ_BUCH-854-002.
PAGE 6
OBJ_BUCH-854-002.
PAGE 7
OBJ_BUCH-854-002.
PAGE 8
OBJ_BUCH-854-002.
PAGE 9
OBJ_BUCH-854-002.
PAGE 10
OBJ_BUCH-854-002.
PAGE 11
OBJ_BUCH-854-002.book Page 18 Sunday, January 4, 2009 12:35 PM 18 | English Safety Notes en General Safety Rules WARNING Read all warning notes and instructions enc slosed with the saw stand and the power tool to be mounted. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
PAGE 12
OBJ_BUCH-854-002.book Page 19 Sunday, January 4, 2009 12:35 PM English | 19 Functional Description Read all warning notes and instructions enc slosed with the saw stand and the power tool to be mounted. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The saw stand is intended exclusively for mounting the following stationary Bosch saws (as of 2008.11): GCM 8 S GCM 10 GCM 10 S GCM 10 SD GCM 12 GCM 12 SD GCM 800 S 3 601 L16 0.. 0 601 B20 0..
PAGE 13
OBJ_BUCH-854-002.book Page 20 Sunday, January 4, 2009 12:35 PM 20 | English Assembly Assembling the Mobile Stand Base Delivery Scope Please also observe the representation of the delivery scope at the beginning of the operating instructions. Before assembling the saw stand, check if all parts listed below are provided: No. Designation – Carefully remove all parts included in the delivery from their packaging. – Remove all packaging material. (e. g. cable ties, etc.
PAGE 14
OBJ_BUCH-854-002.book Page 21 Sunday, January 4, 2009 12:35 PM English | 21 Preparing the Saw Stand Setting Up the Saw Stand (see figure F) Before fastening the attachment sets and the power tool, the stand base must be pulled apart. – To relieve the limit bolts 20, lightly pull the saw stand upward by the handle 6. – Release lock 3. This pulls back the limit bolts that lock the wheels in place.
PAGE 15
OBJ_BUCH-854-002.book Page 22 Sunday, January 4, 2009 12:35 PM 22 | English Extending the Saw Stand (see figure J) Adjusting the Limit Bolts of Lock 3 (see figures M1 –M2) The saw stand can be extended on both sides. Checking: – Place your long workpiece onto the saw table of the power tool. – Release the respective locking knob 4 as required, and pull the table extension 5 out to the desired position. – Retighten the locking knobs again.
PAGE 16
OBJ_BUCH-854-002.book Page 23 Sunday, January 4, 2009 12:35 PM English | 23 Maintenance and Service Maintenance and Cleaning If the saw stand should fail despite the care taken in manufacture and testing, repair should be carried out by an authorised customer services agent for Bosch power tools. In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the saw stand.