Data Sheet

LED display
The LED provides status and troubleshooting
information about the receiver and its connection.
RF interference (jamming) detection and reporting
The receiver detects and reports interference jamming
when the ambient noise level is above jamming
thresholds for a continuous period of 20 seconds.
Communications
RF packet information is received through the use of
two spatial and polar diversity antennas. The receiver
then transmits a 4-bit sequence of information back to
the control panel for status changes.
Wall and cover tamper switch
The receiver transmits a tamper signal when someone
removes the device from it’s base, or pulls it away
from the wall.
Certifications and approvals
Region Certification
Australia RCM
USA ANSI-
SIA
CP-01-2010-Control Panel Standard -
Features for False Alarm Reduction
Europe CE EMC, LVD, R&TTE, RoHS
USA UL
UL UL 365 - Police Station Connected Bur-
glar Alarm Units
UL UL 609 - Standard for Local Burglar
Alarm Units and Systems
UL UL 636 - Holdup Alarm Units and Sys-
tems
UL UL 1023 - Household Burglar Alarm Sys-
tem Units
UL UL 1076 - Proprietary Burglar Alarm
Units and Systems
UL UL 985 - Household Fire Warning Sys-
tem Units
UL UL 1610 - Central Station Burglar Alarm
Units
CSFM see our website
FCC Part 15 Class B
Installation/configuration notes
Mounting considerations
You can mount the wireless receiver in residential,
commercial or industrial locations in which a
compatible control panel is already installed. The
installation of the wireless receiver should be at a
distance no greater than 243 m (800 ft) from the
control panel.
Wiring considerations
The wireless receiver connects to a control panel using
the SDI2 connections (PWR, A, B, COM). Use
appropriate gauge wires from the receiver to the
control panel when connecting the wiring to the
terminal block of the receiver.
Compatibility
B9512G/B8512G
B6512/B5512/B4512/B3512
GV4 Series (D9412GV4, D7412GV4 v2.xx or higher)
control panels
RFDL-11-A motion detector
RFDW-SM-A standard door/window contact
RFDW-RM-A recessed door/window contact
RFRP-A repeater
RFPR-12-A motion detector
RFPR-C12-A motion detector (curtain)
RFUN-A universal transmitter
RFKF-FB-A 4-button keyfob
RFKF-TB-A 2-button keyfob
RFPB-TB-A 2-button panic
RFPB-SB-A single button panic
RFGB-A glass break
Parts included
Quantity Component
1 Wireless receiver
1 Hardware pack
1 Installation guide
Technical specifications
Properties
Dimensions 139.70 mm x 209.60 mm x 31.80 mm
(5.50 in x 8.25 in x 1.25 in)
Wiring distance 243 m (800 ft)
Wiring gauge 0.65 mm (22 AWG) to 2.0 mm (18 AWG)
Tamper detection Transmits a tamper switch signal when
the unit is removed from its base, or the
mounting surface.
Power
Power/voltage 10-14 VDC, 12 VDC nominal
Maximum current draw 70 mA
Frequency 433.42 MHz
Environmental Considerations
Operating Environment 0ﾟC to +49ﾟC (+32ﾟF to +120ﾟF )
Relative humidity Up to 93% non-condensing
Use Intended for indoor use.
2 | RADION receiver SD