Installation Manual
Table Of Contents
- Title Page
 - Table of Contents
 - Certifications, approvals, listings, and safety
 - Introduction
 - System overview
 - Installation checklist
 - Control panel installation
 - Power supply
 - Telephone communications
 - IP communications
 - Keypads, keyswitches, keyfobs and transmitters
- Keypads
- B915 Basic Keypad
 - B920 Two-line Alphanumeric Keypad
 - B921C Two-line Capacitive Keypad with Inputs
 - B930 ATM Style Alphanumeric Keypad
 - B942 Touch Screen Keypad
 - Shortcuts and custom functions
 - Address settings
 - Supervision
 - Installation and control panel wiring (keypads)
 - Sensor loops overview and wiring (B921C/B942/B942W only)
 - Output wiring (B942/B942W only)
 - Troubleshooting
 
 - Keyswitches
 - RADION keyfobs and Inovonics pendant transmitters
 
 - Keypads
 - On-board outputs
 - Off-board outputs
 - On-board points
 - Off-board points
 - Wireless modules
 - Access control
 - Program and test the control panel
 - Control panel board overview
 - System wiring diagrams
 - Approved applications
 - Keypad Installer menu
- [1] Program menu
- [1] Reporting > [1] Phone menu parameters
 - [1] Reporting > [2] Network menu parameters
 - [1] Reporting > [3] Routing menu parameters
 - [1] Reporting > [4] Personal Note menu parameters
 - [2] Network > [1] Ethernet > (choose the bus module or on-board) > [1] Module Parameters menu
 - [2] Network > [1] Ethernet > (choose the bus module or on-board) > [2] Address Parameters menu
 - [2] Network > [1] Ethernet > (choose the bus module or on-board) > [3] DNS Parameters menu
 - [2] Network > [2] Cellular > (choose the SDI2 cellular module or plug-in module)
 - [3] RPS > [1] RPS Passcode menu parameters
 - [3] RPS > [2] RPS Phone Number menu parameters
 - [3] RPS > [3] RPS IP Address menu parameters
 - [3] RPS > [4] RPS Port Number menu parameters
 - [4] Area Options menu parameters
 - [5] Keypad menu parameters
 - [6] Users menu parameters
 - [7] Points menu parameters
 - [8] Disable Programming menu
 
 - [2] Wireless menu
- [1] RF Point Menu> [1] Enroll Point RFID
 - [1] RF Point Menu> [2] Replace Point RFID
 - [1] RF Point Menu> [3] Remove Point RFID
 - [2] RF Repeater Menu > [1] Add Repeater
 - [2] RF Repeater Menu > [2] Replace Repeater
 - [2] RF Repeater Menu > [3] Remove Repeater
 - [3] RF Diagnostic Menu > [1] RF Points
 - [3] RF Diagnostic Menu > [2] RF Repeater Menu
 
 - [3] Diags menu
 - [4] Serv Byp (Service Bypass) menu
 - [5] Versions menu
 - [6] Cloud menu
 
 - [1] Program menu
 - Specifications
 - Appendix
 - Back Page
 
CTN Name UL 985
Fire
Intrusion cUL
B921C Two-line Capacitive Keypad with Inputs (SDI2)
4
x x x
B930 ATM Style Alphanumeric Keypad (SDI2) x x x
B942 Touch Screen Keypad (B942W white)      
CX4010 UL Listed Class 2 Transformer 18 VAC 22 VA 60 Hz x x  
D125B Dual Class B Initiating Module
5
x x x
D126 Battery (12.0 VDC, 7 Ah)      
D1218 Battery (12 V, 18 Ah)      
D161 Phone Cord      
D162 Phone Cord      
D130 Auxiliary Relay Module x x x
D132A Smoke Detector Reversing Relay Module x    
D133 Single Relay Module x x  
D134 Dual Relay Module x x  
FCC-380 Carbon Monoxide Detector (example of UL listed device,
other UL listed devices are available)
x    
F220-P with
F220‑B6
Photoelectric Smoke Detector with Detector Base (example of
UL listed detector, other UL listed detectors are available)
x    
HUB Potter HUB Holdup Button (example of UL listed holdup
device, other UL listed devices are available)
  x  
ICP-EZTS Tamper Switch x x x
ICP-TR1822-CAN Plug-in Transformer 120 VAC primary, 18 VAC 22 VA secondary     x
ISC-BDL2-WP12 Blue Line Gen2 Pet Friendly TriTech Motion Detector
(example of UL listed detector, other UL listed devices are
available)
  x x
MB-G6-12-R Wheelock MB Series 12V 6 " Fire Bell (Red) (example of UL
listed device, other UL listed devices are available)
x    
5110/4001-42 Rothenbuhler High Security Bell   x  
1
Refer to the 2-wire Powered loop Module (B201) Installation Guide (P/N: F01U296412) for compatible B201
devices.
2
Refer to the section within this section for compatible RADION devices.
3
Refer to the section within this section for compatible Inovonics devices.
4
Only ULC listed for Proprietary Burglary and Residential Fire.
5
Refer to the Dual Class B Inititating Module (D125B) Installation Instructions (P/N: F01U036340) for compatible
D125B devices.
7
Check for availability in your region.
8
B6512 only.
Control Panel System overview | en 17
Bosch Security Systems, Inc. Installation and System Reference Guide 2016.05 | 14 | F.01U.287.180










