Installation Manual

B91x/B92x keypads use of Replace Point RFID
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [2] Wireless > [1] RF Point Menu> [2] Replace Point RFID. The keypad lists any
enrolled points.
3. Use [PREV] or [NEXT] to scroll though the list of wireless points, and go to the point for
which you want to replace the device, or simply enter the point number.
4. Press [ENTER] to replace the device. The keypad instructs you to reset the new device.
5. Initiate discovery on a RADION device per the device instructions, or press the RESET
button on an Inovonics device.
6. When the keypad shows Point Enrolled, escape from the menu.
B93x/B94x keypads use of Replace Point RFID
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [2] Wireless > [1] RF Point Menu> [2] Replace Point RFID. The keypad lists any
enrolled points.
3. Use
/[PREV] or /[NEXT] to scroll though the list of wireless points, and go to the
point for which you want to replace the device, or simply enter the point number.
4. Press [ENTER] to replace the device. The keypad instructs you to reset the new device.
5. Initiate discovery on a RADION device per the device instructions, or press the RESET
button on an Inovonics device.
6. When the keypad shows Point Enrolled, escape from the menu.
[1] RF Point Menu> [3] Remove Point RFID
In this menu, you can remove RFID points.
Remove Point RFID
B91x/B92x keypads use of Remove Point RFID
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [2] Wireless > [1] RF Point Menu> [3] Remove Point RFID. The keypad lists any
enrolled points.
3. Use [PREV] or [NEXT] to scroll though the list of wireless points, and go to the point you
want to remove, or simply enter the point number.
4. Press [ENTER] to remove the device. The keypad removes the device and shows Point
RFID Removed.
5. Escape from the menu.
B93x/B94x keypads use of Remove Point RFID
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to [2] Program > [1] RF Point Menu> [3] Remove Point RFID. The keypad lists any
enrolled points.
3. Use
/[PREV] or /[NEXT] to scroll though the list of wireless points, and go to the
point you want to remove, or simply enter the point number.
4. Press [Remove] to remove the RFID point. The keypad removes the device and shows
Point RFID Removed.
5. Escape from the menu.
[2] RF Repeater Menu > [1] Add Repeater
In this menu, you can add Repeater points.
Add Repeater
20.2.3
20.2.4
Control Panel Keypad Installer menu | en 137
Bosch Security Systems, Inc. Installation and System Reference Guide 2016.05 | 14 | F.01U.287.180