Specifications

Wireless
B820 SDI2 Inovonics Interface Module
ENKIT-SDI2 SDI2 Inovonics Interface and Receiver Kit. Includes B820
and EN4200
EN1210 Universal Transmitter (Single-input)
EN1210EOL Universal Transmitter with EOL Resistor
EN1210W Door-Window Transmitter with Reed Switch
EN1215EOL Universal Transmitter with Wall Tamper, Reed Switch, and
EOL Resistor
EN1223D Water‑resistant Pendant Transmitter (Double‑button)
EN1223S Water‑resistant Pendant Transmitter (Single‑button)
EN1224-ON Multiple-Condition Pendant Transmitter
EN1233D Necklace Pendant Transmitter (Double-button)
EN1233S Necklace Pendant Transmitter (Single-button)
EN1235D Beltclip Pendant Transmitter (Double-button)
EN1235DF Fixed-location Transmitter (Double-button)
EN1235S Beltclip Pendant Transmitter (Single-button)
EN1235SF Fixed-location Transmitter (Single-button)
EN1247 Glass-break Detector Transmitter
EN1249 Bill Trap Transmitter
EN1242 Smoke Detector Transmitter
EN1260 Wall Mount Motion Detector
EN1261HT High Traffic Motion Detector
EN1262 Motion Detector with Pet Immunity
EM1265 360° Ceiling Mount Motion Detector
EN4200 Serial Receiver
EN5040-T High Power Repeater with Transformer
Parts included
The B4512 includes the following parts:
Quant. Component
1 B4512 Board
1 Literature pack
• UL Installation Instructions
• Owner’s Manual
• Release Notes
• SIA Quick Reference Guide
1 Literature CD containing all product literature
The available kits come with the parts indicated in the following table:
Kits
Components ‑C ‑D
B4512 Board 1 1
Literature CD containing all product
literature
1 1
CX4010 Plug-in Transformer (18 VAC
22 VA 60 Hz)
1 1
B10 Medium Control Panel Enclosure 1
B11 Small Control Panel Enclosure 1
Technical specifications
Communications
Ethernet One on-board Ethernet connector
Environmental considerations
Relative humidity 5% to 93% at +90℉ (+32℃),
non‑condensing
Temperature (operating) +32°F to +122°F (0°C to +49°C)
Number of…
Areas: 2
Custom functions: 2
Events: Up to 127
Passcode users: 32, plus 1 Installer passcode
Points: 28 (8 on‑board, up to 20
off‑board)
Programmable relay outputs: 27 (3 on‑board, up to 24
off‑board)
RF points: 20
SKEDs: 5
Power Requirements
Current draw (maximum) Idle 125 mA; Alarm 155 mA
Output (alarm) 1.3 A at 12 VDC
Output (auxiliary, continuous
power, and switched auxiliary
combined):
800 mA at 12 VDC nominal
Voltage (operating): 12 VDC nominal
Voltage (AC): CX4010 UL Listed Class 2
Transformer 18 VAC 22 VA 60 HZ
Trademarks
All hardware and software product names used in this
document are likely to be registered trademarks and
must be treated accordingly.
Ordering information
Standard Medium Enclosure Package
Order number B4512-C
Standard Small Enclosure Package
Order number B4512-D
5 | B4512 Control Panels