Installation Instructions

Specifications
Control panel power supply specifications
Voltage input
(power
supply)
Primar
y
18 VAC
terminals
18 VAC 22 VA Class 2 transformer
(CX4010)
Secon
dary
BAT
terminals
12 Volt Sealed Lead Acid
Rechargeable Battery (D126 or
D1218)
Current
requirements
Control Panel: Idle 125 mA; Alarm 155 mA
Refer to the Standby battery requirements and calculations
section in the control panel Installation and System
Reference Guide for the current draw requirements of
other system components.
Power outputs All external connections are power-limited. The battery
terminals are not power limited.
SDI2
terminals
and
interconnect
connector
PWR/R
and
COM/B
terminal
s
800 mA for continuously powered
devices. Shared with AUX power
terminal.
Alarm power
output
OUTPUT
A
terminal
1.3 A for Burglary applications.
Output can be steady or one of
four pulsed patterns depending
on programming. Refer to
Outputs in RPS Help or the
control panel Program Entry
Guide.
Aux power AUX and
COM
terminal
s
800 mA for continuously powered
devices. Shared with SDI2 R/PWR
terminal and interconnect
connector.
8
46 en | Specifications Control Panels
2015.09 | 08 | F.01U.287.185 Bosch Security Systems, Inc.