Installation Instructions

Control panel installation
This section explains how to mount the control panel enclosure,
how to mount the control panel into the enclosure, and provides
an overview of how to wire modules to the control panel.
Install the enclosure and wiring label
Refer to Enclosures to determine if the application requires a
specific enclosure.
Installing the enclosure:
1. Remove any knockouts prior to installing the control panel.
2. Mount the enclosure in the desired location. Use all
enclosure mounting holes. Refer to the mounting
instructions supplied with the selected enclosure.
3. Pull the wires into the enclosure.
4. Install the supplied Enclosure Wiring Label (B5512/B4512/
B3512) on the inside of the enclosure door.
Notice!
Electromagnetic interference (EMI) can cause problems on long
wire runs.
3
3.1
10 en | Control panel installation Control Panels
2015.09 | 08 | F.01U.287.185 Bosch Security Systems, Inc.