Specifications
Manuals
Brands
Bosch Manuals
Home building and Decor
B450
11
12
13
14
15
16
17
18
19
20
Table Of Contents
Title Page
Table of Contents
Safety
Introduction
About documentation
Bosch Security Systems, Inc. product manufacturing dates
Installation workflow
System overview
Module overview
Bus address settings
Installation
Setting the bus address
Insert the B44x communication module (required and available separately)
Mount the module in the enclosure
Mount and wire the tamper switch (option for SDI2 bus only)
Install and mount the plug-in communicator antenna
Wire to the control panel
Wire to an SDI2 control panel
Wire to an SDI control panel
Wire to an option bus control panel
Configuration
Plug and Play configuration
Configuration for SDI2 control panels
Configuring and viewing status from RPS
Use USB to configure the B450
Install a communication program
Log into the USB interface
USB Main menu
USB menu structure
USB menu
Short Message Service (SMS) configuration
Use SMS to configure the B450
Firmware Update page
Maintenance and troubleshooting
LED status indicators
Show the firmware version
Diagnostic log
Understanding network polling
Example 1 - High Security Application
Example 2 - Medium Security Application
Example 3 - Backup or Low Security Application
Control panel programming using cellular
Specifictions and certifications
Technical specification
Certifications
Back Page
Figure 5.1: B450 settings shown as B42x in RPS with a GV4 control panel at v1.00
18
en | Configuration
Conettix Plug-in Communicator
Interface
2013.09 | 02 | F.01U.282.875
Installation and Operation Guide
Bosch Security Systems, Inc.
1
...
...
16
17
18
19
20
...
...
48
