User Manual

Alarm en-us
15
Alarm
9 Alarm
Alarm
9.1 Door alarm
If the appliance door is open for a while, the door alarm
switches on.
Switching off the door alarm
▶
Close the appliance door or press .
a The warning tone is switched off.
a goes out.
Door alarm warning signal
You can activate or deactivate the door alarm warning sig-
nal.
Door alarm warning signal activated
Door alarm warning signal deactivated
Activating the door alarm warning signal
1. Press .
2. Press .
3. Press / (Submenu setting) until the setting display
submenu shows the required setting.
4. Press .
Deactivating the door alarm warning signal
1. Press .
2. Press .
3. Press / (Submenu setting) until the setting display
submenu shows the required setting.
4. Press .
9.2 Temperature alarm
If the freezer compartment becomes too warm, the tem-
perature alarm will switch on.
CAUTION
Risk of harm to health!
During the thawing process, bacteria may multiply and
spoil the frozen food.
▶
Do not refreeze partly or completely thawed food.
▶
Refreeze food only after cooking.
▶
The frozen items should no longer be stored for the
maximum storage period.
The temperature alarm can be switched on in the following
cases:
¡ The appliance is switched on.
Do not store any food until the appliance has reached
the set temperature.
¡ Large quantities of fresh food are being placed inside.
Switch on Super freezing before placing large quantities
of food in the appliance.
¡ The freezer compartment door is open for too long.
Check whether the frozen food has defrosted or
thawed.
Switching off the temperature alarm
▶
Press .
a The warning tone is switched off.
a The temperature display (freezer compartment) briefly
indicates the warmest temperature reached in the
freezer compartment. The temperature display (freezer
compartment) then indicates the set temperature again.
a From this time on, the warmest temperature is recalcu-
lated and saved.
HomeConnect™
10 HomeConnect™
HomeConnect™
This appliance is network-capable. Connecting your appli-
ance to a mobile device lets you control its functions via
the HomeConnect™ app.
HomeConnect™ services are not available in every coun-
try. Availability of the HomeConnect™ function depends
on the availability of HomeConnect™ services in your
country. You can find information on this at: www.home-
connect.com.
To be able to use HomeConnect™, you must first set up
the connection to the WLAN home network (Wi-Fi
1
) and to
the HomeConnect™ app.
After switching on the appliance, wait at least 2minutes
until internal device initialization is complete. Only then
should you set up HomeConnect™.
¡ Connecting appliance to WLAN home network (Wi-Fi)
with WPS function → Page15
¡ Connecting appliance to WLAN home network (Wi-Fi)
without WPS function → Page16
The HomeConnect™ app will guide you through the en-
tire registration process. Follow the instructions in the
HomeConnect™ app to make the settings.
Tips
¡ Please consult the HomeConnect™ documents sup-
plied.
¡ Please also note the information in the HomeCon-
nect™ app.
Notes
¡ Please also note the safety information in this instruc-
tion manual and ensure that it is also observed when
operating the appliance using the HomeConnect™
app.
→ "Safety", Page3
¡ Operating the appliance on the appliance itself always
takes priority. It is not possible to operate the appliance
using the HomeConnect™ app during this time.
10.1 Connecting the appliance to a WLAN
home network (Wi-Fi) with WPS func-
tion
If your router has a WPS function, you can connect the ap-
pliance to your WLAN home network (Wi-Fi) automatically.
1. Press .
a lights up and the submenu display shows ⁠.
2. Press / (Submenu) repeatedly until the submenu
display shows and the submenu setting display
shows .
3. Press (Submenu setting).
a The submenu display shows an animation for 2min-
utes. The appliance is ready for automatic connection to
the WLAN home network (Wi-Fi).
4. Activate the WPS function on the router during this pe-
riod.
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.