Data Sheet

B3512E Control Panel
The B3512E is available only in kits, with a minimum
order quantity of 10.
For kits, refer to Quick Selection Guide (B Series Kits)
on the Documents tab of the control panel’s Product
Page at us.boschsecurity.com.
Order number B3512E
Accessories
B520 Auxiliary Power Supply Module
Provides auxiliary power to 12 VDC devices or to SDI2
modules.
Order number B520
B201 2-wire Powered Loop Module
The module provides a single powered initiating device
circuit. The module supports compatible 12 V 2-wire
smoke detectors. It also supports connecting burglary
devices to the control panel.
Order number B201
RADION receiver SD
Receives RF signals from RADION transmitters,
repeaters, and glassbreaks. Operates at 433.42 MHz.
For use with compatible SDI2 bus control panels.
Order number B810
D122 Dual Battery Harness
Harness with circuit breaker. Connects two batteries
to a compatible control panel.
Order number D122
D122L Dual Battery Harness with Long Leads
Color-coded harness with circuit breaker and leads
measuring 89 cm (35 in.). Connects 12 V batteries to
compatible control panels.
Order number D122L
D126 Standby Battery (12 V, 7 Ah)
A rechargeable sealed lead‑acid power supply used as
a secondary power supply or in auxiliary or ancillary
functions.
Order number D126
D1218 Battery (12 V, 18 Ah)
A 12 V sealed lead‑acid battery for standby and
auxiliary power with two bolt‑fastened terminals.
Includes hardware for attaching battery leads or spade
connectors
Order number D1218
CX4010 Plug‑in Transformer
For use in North America. 110 VAC primary voltage
input. 18 VAC, 22 VA secondary input.
Order number CX4010
ICP‑TR1822‑CAN Plug‑in Transformer
For use in Canada. 110 VAC primary voltage input. 18
VAC, 22 VA secondary input.
Order number ICP-TR1822-CAN
D8004 Transformer Enclosure
For applications such as fire alarm that might require a
transformer enclosure.
Order number D8004
B8103 Enclosure
White steel enclosure measuring 41 cm x 41 cm x 9 cm
(16 in. x 16 in. x 3.5 in.).
Order number B8103
D8103 Enclosure
Grey steel enclosure measuring 41 cm x 41 cm x 9 cm
(16 in. x 16 in. x 3.5 in.).
Order number D8103
D8108A Attack Resistant Enclosure
Grey steel enclosure measuring 41 cm x 41 cm x 9 cm
(16 in. x 16 in. x 3.5 in.). UL Listed. Includes a lock and
key set.
Order number D8108A
D8109 Fire Enclosure
Red steel enclosure measuring 40.6 cm x 40.6 cm x 8.9
cm (16 in. x 16 in. x 3.5 in). UL Listed. Includes a lock
and key set.
Order number D8109
B10 Medium Control Panel Enclosure
White, steel enclosure. Accepts an optional lock and
tamper switch. Measures 35.6 cm x 31.8 cm x 7.6 cm
(14 in x 12.5 in x 3 in).
Order number B10
B11 Small Control Panel Enclosure
White, steel enclosure. Accepts an optional lock and
tamper switch. Measures 27.8 cm x 25.9 cm x 8.32 cm
(10.9 in x 10.2 in x 3.3 in).
Order number B11
B12 Mounting Plate for D8103 Enclosure
Required for mounting select control panels and other
devices in D8103, D8108A, D8109, or BATB Battery
Box enclosures.
Order number B12
D101 Lock and Key Set
Short-body lock set with one key supplied. Uses the
D102 (#1358) replacement key.
Order number D101
D110 Tamper Switch
Screw‑on tamper switch that fits all enclosures.
Shipped in packages of two.
Order number D110
ICP‑EZTS Dual Tamper Switch
Combination tamper switch with a wire loop for
additional tamper outputs.
Order number ICP-EZTS
7 | B3512 Control Panels