Owner's Guide

en-us
9
5. Use an open end wrench to turn the screws and
then align the rear of the appliance.
To raise the rear of the appliance:
Turn the screw clockwise.
To lower the rear of the appliance:
Turn the screw counterclockwise.
6. Use the level to check if the appliance is level.
NOTICE
To ensure that the appliance does not move, the
front feet must be firmly planted on the floor.
7. If the height of the refrigerator compartment doors
are uneven or if the freezer compartment drawer is
slanted after adjusting the level of the appliance,
use the following method to adjust them.
Adjusting a refrigerator door
If the height of the refrigerator doors is uneven:
1. Determine which refrigerator door needs to be
raised.
2. Turn the screw nut on the lower hinge to adjust the
refrigerator door.
To raise a refrigerator door:
Turn the screw counterclockwise.
To lower a refrigerator door:
Turn the screw clockwise.