Owner's Guide

en-us
11
Installing the handles
Do not install the handles until the appliance is
installed in its designated location and is level.
All handles are the same and are installed in the same
manner.
1. Remove the protective films from the refrigerator
doors and the freezer compartment drawer.
2. Insert the door handles into the guides.
n Refrigerator doors: The handle screws must
face the center of the appliance.
n Freezer compartment drawer: The handle
screws must face down.
3. Tighten the handle screws with the accompanying
Allen wrench.
Installing the base plate
1. Remove the three screws on the appliance.
2. Mount the base plate.
3. Insert the three screws and tighten.