Data Sheet

Region Certification
FCC Part 15 Class B
FDNY-
CoA
6174
FDNY-
CoA
6196
Canada ULC CAN/ULC S303 - Local Burglar Alarm
Units and Systems
ULC CAN/ULC S304 - Standard for Signal Re-
ceiving Center and Premise Burglar
Alarm
ULC ULC-ORD C1023 - Household Burglar
Alarm System Units
ULC ULC-ORD C1076 - Proprietary Burglar
Alarm Units and Systems
IC ICES-003 - Information Technology
Equipment (ITE)
Installation/configuration notes
Wiring considerations
The module to the control panel using the PWR, A, B,
COM terminals on the control panel using the screw
terminal strip or the interconnect wiring connector.
Use 12 AWG to 22 AWG (1.5 mm to 0.6 mm) wires
from the module to the control panel.
Compatibility
For UL 864 compliance, use a UL commercial fire
approved control panel.
Control panels B9512G/B9512G-E (Up to 59
modules)
B8512G/B8512G-E (Up to 9 modules)
B6512 (Up to 9 modules)
B5512/B5512E (Up to 4 modules)
B4512/B4512E (Up to 2 modules)
D9412GV4 (Up to 24 modules)
D7412GV4 (Up to 7 modules)
D7212GV4 (Up to 3 modules)
Parts included
Quantity Component
1 Octo-input module
1 Hardware pack
1 interconnect cable
1 Literature pack
Technical specifications
Properties
Dimensions 2.5 in x 3.8 in x 0.60 in
(6.37 cm x 9.6 cm x 1.5 cm)
Environmental considerations
Relative humidity 5% to 93% at +32°C (+90°F)
Temperature (operating) 0°C to +49°C (+32°F to +120°F)
Power requirements
Current 35 mA
Voltage 12 VDC nominal
Wiring
SDI2 wiring Maximum distance – Wire size
(unshielded wire only): 1000 ft (305
m) – 22 AWG (0.65 mm)
1000 ft (305 m) – 18 AWG (2 mm)
Unshielded wire only
Loop inputs
Loop Inputs Up to eight inputs. Input contacts may
be Normally Open (NO) or Normally
Closed (NC) with 1kΩ EOL resistor(s)
for supervision. Note: Normally Closed
(NC) is not permitted in Fire
installations.
Ordering information
B208 Octo-input Module
Provides 8 programmable inputs.
Order number B208
2 | B208 Octo-input Module