Technical data

Operation
The following tables identify common Aux commands (hot keys) for Bosch protocol and for
Pelco protocol.
Hot Keys, Bosch Protocol
Preset Command /
Function
Key Description Example
Autopan without
limits - to pan 360°
On/Off Autopan - to pan 360º ON+1+Enter
To start Autopan
between limits
On/Off To start AutoPan between limits ON+2+Enter
AutoPan Menu On Enters AutoPan Menu ON+5+Enter
Preset Tour 1 On/Off To activate or deactivate Preset Tour 1 ON+8+Enter
Preset Tour 2 On/Off To activate or deactivate Preset Tour 2 ON+7+Enter
Backlight Comp. On/Off Backlight Compensation ON+20+Enter
WB Setup On/Off Enters White Balance menu ON+35+Enter
Camera Default
Restored
On Restores Settings for the camera block only,
not for all PTZ or other unit functions
ON+40+Enter
Main Menu On Enters Main Setup Menu ON+46+Enter
Tour 1 On/Off Playback A ( Continuous) ON+50+Enter
Tour 1 On/Off Playback A ( Single) ON+51+Enter
Tour 2 On/Off Playback B ( Continuous) ON+52+Enter
Tour 2 On/Off Playback B ( Single) ON+53+Enter
Alarm Menu On Enters Alarm Menu ON+64+Enter
Alarm Action
stopped
Off Acknowledge Alarms and Deactivate Alarms OFF+65+Enter
SW Ver. Displayed On Displays SW version no. ON+66+Enter
Digital Zoom On/Off Changes to Digital Zoom mode ON+80+Enter
Privacy Masking On/Off Enters Privacy Masking menu ON+87+Enter
Tour 1 On/Off Record Tour A: Enters Tour Setup menu to
set up Tour 1
ON+100+Enter
Tour 2 On/Off Record Tour B: Enters Tour Setup menu to
set up Tour 2
ON+101+Enter
Preset 1~99 Set To set Preset 1~99 Set
+1~99+Enter
Preset 1~99 Shot To run Preset 1~99 Shot
+1~99+Enter
Run Calibration Set Set-recalibrate Home Position Set+110+Enter
7
62 en | Operation AUTODOME 5000 Analog PTZ Camera
2013.07 | 1.3 | Operations Manual Bosch Security Systems, Inc.