Technical data

Return Time
The camera starts to count down RETURN TIME when the dome idles, and then execute the
SELECT MODE function when the return time is up. The RETURN TIME ranges from 5 to 99
seconds or 2, 3, 4, or 5 minutes.
Go
If the HOME function is enabled, select this parameter to execute the HOME.
Schedule
You can use the schedule function to program a preset point or function (Preset Tour / Auto
Pan / Tour) to be executed automatically at a specific time.
SCHEDULE
Switch Off
Point 01
Hour 00
Minute 00
Mode None
No Action None
Schedule Reset Yes
Exit YES
Switch
Select <ON> to enable or <OFF> to disable the schedule function.
Point
You can arrange 32 sets of schedule points. Each set of schedule point can be assigned one
kind of schedule modes.
Hour / Minute
These items are for setting up the time to execute each schedule point.
Mode
This is for setting the schedule function of the selected schedule point. The options are listed
as follows. For options other than <NONE>, further setting of <MODE LINE> is required.
– None
No action will be executed for the schedule point.
– Preset
You can select <PRESET > as an action carried out in a schedule point.
– Preset Tour
You can select <PRESET TOUR> as an action carried out in a schedule point.
– Autopan
You can select <AUTOPAN LINE> as an action carried out in a schedule point.
– Tour
You can select <TOUR LINE> as an action carried out in a schedule point.
– Night Mode
If < NIGHT MODE > is selected, the Night Mode function is activated for a schedule point.
– Tracking
You can select <MOTION TRACK> as an action carried out in a schedule point.
6.12.7
AUTODOME 5000 Analog PTZ Camera On-Screen Display (OSD) Menu | en 47
Bosch Security Systems, Inc. Operations Manual 2013.07 | 1.3 |