Technical data

Installation
Follow the instructions below to complete cable connections of the AUTODOME 5000 camera.
Connect the camera to other devices as shown in the diagram to complete a video surveillance
solution.
Figure 4.1: System Configuration
1
Repeater
2 AUTODOME 5000 camera
3 Video cable
4 Switch/Quad/Mux/DVR
5 Main monitor
6 Call monitor
7 Control keyboard
Notice!
To extend the network distance up to 1.2 km (4000 feet) and to protect the connected
devices, it is highly recommended to place a repeater at the mid-point. However, a repeater
may be needed in the network distance less than 1.2 km if the used cables are not the CAT 5,
24-gauge cables. Refer to section RS-485. For detailed information about the repeater, refer
to its manual.
4
14 en | Installation AUTODOME 5000 Analog PTZ Camera
2013.07 | 1.3 | Operations Manual Bosch Security Systems, Inc.