Operation Manual

16 | English
F 016 L81 125 | (22.7.15) Bosch Power Tools
Charging Advice
With continuous or several repetitive charging cycles without
interruption, the charger can warm up. This is not meaningful
and does not indicate a technical defect of the battery charger.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Troubleshooting
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
d.c.
Problem Possible Cause Corrective Action
Blade guard can not be mounted over
cutting disc
Incorrect assembly Remove cutting disc and mount blade
guard again
Trimmer fails to operate Battery discharged Recharge battery; also see “Battery
Charging”
Battery too hot/cold Allow to cool/warm
Trimmer runs intermittently Internal wiring of machine damaged Contact Service Agent
On/Off switch defective Contact Service Agent
Garden product labours Grass too high Cut in stages
Machine does not cut Cutting blade damaged Replace the blade
Increased vibration Cutting blade damaged Replace the blade
OBJ_BUCH-2510-001.book Page 16 Wednesday, July 22, 2015 9:20 AM