Installation Manual
Table Of Contents
- 1 Important Information
- 2 Safety Instructions
- 3 Introduction
- 4 Technical Data
- 5 Installing
- 5.1 Mounting
- 5.2 Unmounting
- 5.3 Opening the Case
- 5.4 Closing the Case
- 5.5 Cabling
- 5.6 Grounding and Shielding
- 5.7 Connecting Power Supply
- 5.8 Ethernet Interface
- 5.9 RS-485 Host Interface
- 5.10 RS-232 Host Interface
- 5.11 DIL switch selector
- 5.12 RS-485 for extension modules
- 5.13 Wiegand Interface for Card Readers
- 5.14 Connecting Relay Outputs
- 5.15 Connecting Analog Input Devices
- 5.16 Tamper Protection
- 6 Operating
- 7 Appendix
AMC2 4W Table of Contents | en 3
Bosch Sicherheitssysteme GmbH Installation manual V 7.6 | 2008.12
Table of Contents
1 Important Information 5
1.1 Explanation of symbols in this document 5
1.2 Internet 6
2 Safety Instructions 7
2.1 Important Safety Notes 7
2.2 Safety Precautions 9
2.3 Unpacking 10
3 Introduction 12
3.1 Description of the AMC2 4W 12
3.2 Equipment Configuration 14
3.3 Performance Characteristics 17
3.4 System Overview 18
4 Technical Data 20
5 Installing 23
5.1 Mounting 23
5.2 Unmounting 24
5.3 Opening the Case 25
5.4 Closing the Case 26
5.5 Cabling 27
5.5.1 Conductor data 27
5.6 Grounding and Shielding 28
5.6.1 Host Interface 29
5.6.2 Extension Interface 30
5.7 Connecting Power Supply 31
5.8 Ethernet Interface 32
5.9 RS-485 Host Interface 33
5.9.1 RS-485 Two Wire Connection 35
5.9.2 RS-485 Four Wire Connection 36
5.10 RS-232 Host Interface 38