Installation Manual
Table Of Contents
- 1 Important Information
- 2 Safety Instructions
- 3 Introduction
- 4 Technical Data
- 5 Installing
- 5.1 Mounting
- 5.2 Unmounting
- 5.3 Opening the Case
- 5.4 Closing the Case
- 5.5 Cabling
- 5.6 Grounding and Shielding
- 5.7 Connecting Power Supply
- 5.8 Ethernet Interface
- 5.9 RS-485 Host Interface
- 5.10 RS-232 Host Interface
- 5.11 DIL switch selector
- 5.12 RS-485 for extension modules
- 5.13 Wiegand Interface for Card Readers
- 5.14 Connecting Relay Outputs
- 5.15 Connecting Analog Input Devices
- 5.16 Tamper Protection
- 6 Operating
- 7 Appendix
AMC2 4W Technical Data | en 21
Bosch Sicherheitssysteme GmbH Installation manual | V 7.6 | 2008.12
10 to 30 Vdc
Display
64,8 mm x 13,9 mm (2.551 x 0.547 in.)
1 line, 16 characters
Power consumption
AMC: 5 VA
Peripheral devices: using the PBC-60
–up to 55 VA
– constant load: 25 VA
Connectors
Pluggable screw connectors
Protection class
IP30
Environment temperature
0° C to 45° C (32° F to 113° F)
Humidity
Up to 95%, without condensation
Housing material
ABS with OC (UL 94 V-0)
Dimensions
(W/H/D) 232mm x 90mm x 63mm (8.9 x 3.5 x 2.4 in.)
Weight
app. 0,53 kg (0.9 pounds)
!
WARNING!
The voltage drop from the power supply to the AMC has effect
on the AMC interfaces. Their sum must be less than 2 V!