Programming instructions

10 en | User and Installer Code Functions AMAX panel 2000 / AMAX panel 2000 EN

F.01U.241.128 | V2 | 2011.11 Quick Reference Guide Robert Bosch Engineering and Business Solutions

2 User and Installer Code Functions

User

Code

Install

Code

Function Description

• • 0 # Duress alarm

••1#Siren test

• • 2 # Fault and Tamper analysis

• • 3 # View date and time

••4#Walk test

• • 5 # Event memory recall

• • 6 # Reset panel/clear siren

• • 7 # Initiate a modem call

• • 8 # Send Test report

• • 9 # Bypass (inhibit)

• • 96 # Show Zone type

• 97 # Overide all faults

•98#

Enable=# / Disable=* installer code user's access

• • 99 # Change individual code

• 955 # Change/View date and time

• 956 # Add/delete a level 2 user

• 956 # Add/delete Remote Radio User Codes

• 957 # Change domestic phone numbers

• 958 # Enter Programming Mode

• 959 # Exits from installer’s programming mode without saving

the programmed data.

• 960 # Exits from installer’s programming mode with saving the

programmed data.

• 961 # Resets the control panel to factory defaults.

• 962 # Copies the control panel memory to the programming key.

• 963 # Copies the programming key data to the control panel

memory.

• 999 # Displays the software version number or control panel

type.

Default Pads on PCB Default the control panel with the hardware

NOTICE!

Installer code is only active when enabled from user.