Specifications

32 | Operation instructions
830 ES6 720 644 936 (2013/01)
Fig. 42 Connecting power supply cord
[1] Power cord length: 3ft.
Note: The outlet the appliance is plugged into should be clear from
possible water damage.
5.2 Position of the fuses in control unit
To check fuses, proceed as follows:
▶ Remove the front cover, see fig. 4, page 8.
▶ Remove the three screws from the control unit.
Fig. 43
▶ Remove the six screws from the back cover of the control unit, see fig.
44, pos. 2.
▶ Check the fuses in the printed circuit board, see fig. 44, pos. 3.
Fig. 44 Fuses position
▶ After checking the fuses, reinstall all parts in reverse order.
6 Operation instructions
Fig. 45
[1] On/Off button
[2] Reset button
[3] Program Key
[4] LCD display
[5] Up button
[6] Down button
[7] Power On or stand-by LED
6.1 Description LCD Display
Fig. 46 Power bar indicator (input)
6720608643-15.1AL
1
WARNING:
▶ Do not use any cleaning aggressive or corrosive
agents to clean the window.